Wohlhaupter Boring Product Catalog

BORING PRODUCT CATALOG WOHLHAUPTER ®

www.alliedmachine.com

It’s so much easier when you achieve your right away. DESIRED PRECISION

Wohlhaupter specializes in developing innovative, high-precision boring solutions. Our tools achieve the bore quality you require with tight tolerances easily, quickly and precisely.

Allied Machine & Engineering Co. Europe Ltd. is registered to ISO 9001:2015 by bsi.

Allied Machine & Engineering is registered to ISO 9001:2015 by DQS

Wohlhaupter GmbH is registered to ISO 9001:2015 by QUACERT

Our Commitment to YOU Manufacturing is the DNA of success everywhere in the world. When you’re manufacturing, you’re building, creating, and developing something that physically didn’t exist before. At Allied Machine and Wohlhaupter, our core purpose is to provide practical and dependable solutions to improve your manufacturing processes. We know you face challenges and difficulties every day, so we’re here to simplify your holemaking and hole finishing processes and improve your production. However, many factors must be incorporated to truly improve production. Some of those factors include increasing penetration rates while also improving chip formation and evacuation, reducing scrap rates by producing better parts, reducing setup times, and increasing tool life to get the most from your investment. Not only does our tooling achieve these results, but our customer service is also an extension of our tooling advantages. Our Application Engineers and Field Sales Engineers are available to assist with any problems you encounter. Don’t hesitate to put their skills and knowledge to the test. They won’t disappoint. This is our commitment to manufacturing, and it’s our promise to you.

ii

North America

Europe

Asia

Allied Machine 120 Deeds Drive Dover, OH 44622 United States

Allied Machine

Allied Machine Europe 93 Vantage Point Pensnett Estate Kingswinford DY6 7FR, United Kingdom

Wohlhaupter ® India

485 West 3rd Street Dover, OH 44622 United States

B-23, 3rd Floor B Block Community Centre Janakpuri, New Delhi - 110058 India

Superion ®

Wohlhaupter ® GmbH Maybachstrasse 4 72636 Frickenhausen Germany

ThreadMills USA ®

4185 Crosstowne Ct #B Evans, GA 30809 United States

1285 S Patton St. Xenia, OH 45385 United States

iii

Table of Contents

LEADING HOLEMAKING SOLUTIONS WORLDWIDE

Introduction

The MVS Connection v - vi A Master Shanks with MVS Connection B10-A: 1 - 26 B Intermediate Modules B10-B: 1 - 18 C Rough Machining B10-C: 1 - 24 D Grooving Tools B10-D: 1 - 6 E Combi-Line: Rough and Finish Boring B10-E: 1 - 8 F Versatile Fine Boring B10-F: 1 - 82 G Fine Boring B10-G: 1 - 36 H Large Diameter Boring B10-H: 1 - 30 I Inserts B10-I: 1 - 50 J Modular Tool Holders B10-J: 1 - 48 K UPA Versatile Boring Heads B10-K: 1 - 18 L Lay Down Cartridges B10-L: 1 - 12 M Accessories / Technical Information B10-M: 1 - 12

Allied Machine & Engineering is a worldwide leader in holemaking and finishing solutions. We are committed to providing practical and dependable solutions to our customers through innovative designs and superior customer and technical support. We continue to expand our product offering in order to provide new and different solutions. With Field Sales Engineers located around the world, we position ourselves to provide technical support on site, right at your spindle.

Your safety and the safety of others is very important. This catalog contains important safety messages. Always read and follow all safety precautions. This triangle is a safety hazard symbol. It alerts you to potential safety hazards that can cause tool failure and serious injury. When you see this symbol in the catalog, look for a related safety message that may be near this triangle or referred to in the nearby text. There are safety signal words also used in the catalog. Safety messages follow these words: WARNING means that failure to follow the precautions in this message could result in tool failure and serious injury. NOTICE means that failure to follow the precautions in this message could result in damage to the tool or machine but not result in personal injury. NOTE and IMPORTANT are also used. These are important that you read and follow but are not safety-related. Visit www.alliedmachine.com for the most up-to-date information and procedures. Patent Information Allied Machine & Engineering patent information can be found at www.alliedmachine.com/patents

iv

| Allied Machine & Engineering

The MVS Connection

Wohlhaupter ® GmbH developed the world's first modular tooling system called MultiBore ® in 1973. The modular tooling system was designed to be compatible with all machine spindles, and its connection features a triple point clamp (Figure 1). The triple point clamp ( 1 , 2 , & 3 ) maximizes rigidity and creates an accuracy less than 3µm when the tool is changed.

• Ensures high axial clamping forces on mating surfaces. • Provides maximum rigidity. • Threaded taper pins for precise cutter positioning.

2

1

Triple Point Connection

Figure 1

Intermediate Module

3

Shank

MVS Connection Color Guide

Wohlhaupter ® created a unique color-coding system to find the right connections for different tool components quickly and easily. Each Wohlhaupter / MVS connection size has its own color-coding. Simply match the colors to select the correct combination of tool components (Figure 2).

Figure 2

63 - 36

63 - 36

50 - 28

50 - 28

M 8 19.5 - 11 22 - 11 25 - 14 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 100 - 56 D 40 D 60

v

www.alliedmachine.com | 1.330.343.4283

| Allied Machine & Engineering

The MVS Connection

Example Machining Parameters Hole Diameter: 75.00 mm (2.942") Hole Depth: 200.00 mm (7.874") Machine Spindle: HSK-A 100 DIN 69893

1

1 Select your boring tool.

• Example: 464 Balance Boring Head 2 Select the tool that meets the required boring range. • MVS connection: 50 - 28 • A = 65.00 mm - 83.00 mm (2.559" - 3.268") • Part No. : 464006

2

50 - 28

3 Select the master shank that fits your spindle. • Machine spindle: DIN 69893 HSK 4 Choose the connection that fits your application. • MVS connection: 63 - 36 • Part No. : 245015

3

4

63 - 36

5 Select the correct intermediate module. Must meet the hole depth requirements and MVS connections for both the boring head and shank Hole depth: 200.00mm (7.874") Boring tool 464006 length ( X 1 ): 75.00 mm (2.953") Master shank 245015 length ( L 1 ): 51.00 mm (2.008") Minimum required length of adapter: 74.00 mm (2.913")

5

Boring tool 464006 MVS connection: 50 - 28 Master shank 245015 MVS connection: 63 - 36 Adapter Part No.: 119025

63 - 36

50 - 28

www.alliedmachine.com | 1.330.343.4283

vi

S E C T I O N B10-A Master Shanks with MVS Connection

Master Shanks

Master Shanks with MVS Connection Wohlhaupter MVS connection shanks provide a high level of accuracy when building or replacing components. Our master shanks adapt to any machine tool spindle, making it easy to find the shank you need.

Applicable Industries Aerospace Agriculture

Automotive

Defense General Production

Heavy Equipment

Hydraulics

Marine

Medical

Oil and Gas

Renewable Energy/ Energy

Tool, Mold, and Die

Reference Icons The following icons will appear throughout the catalog to help you navigate between products.

Table of Contents

Master Shanks Cylindrical Shanks. . . . . . . . . . . . . . . . . . . .................... 3 248 (249). . . . . . . . . . . . . . . . . . . . . ...................... 3 Carbide Straight. . . . . . . . . . . . . . . . . . . ................... 4 HSK (DIN 69893) Metric (mm) . . . . . . . . . . . . . . . . . . . . .................... 5 Imperial (in). . . . . . . . . . . . . . . . . . . . ..................... 6 PSC (ISO 26623-1) Metric (mm) . . . . . . . . . . . . . . . . . . . . .................... 7 Imperial (in). . . . . . . . . . . . . . . . . . . . ..................... 8 BT (JIS B 6339) Dual Contact . . . . . . . . . . . . . . . . . . . ..................... 9 Metric Standard . . . . . . . . . . . . . . . . . . .................. 10 Imperial Standard. . . . . . . . . . . . . . . . . .................. 11 SK (DIN 69871-AD / B -D) Dual Contact .. . . . . . . . . . . . . . . . . . .................... 12 Metric Standard . . . . . . . . . . . . . . . . . . .................. 13 Imperial Standard. . . . . . . . . . . . . . . . . .................. 14 CAT Dual Contact .. . . . . . . . . . . . . . . . . . .................... 15 Metric Threads . . . . . . . . . . . . . . . . . . ................... 16 Imperial Threads. . . . . . . . . . . . . . . . . . .................. 17 NMTB. . . . . . . . . . . . . . . . . . . . . . . . ........................ 18 Straight . . . . . . . . . . . . . . . . . . . . . . . ....................... 19 DIN 2080 . . . . . . . . . . . . . . . . . . . . . . ....................... 20 Morse Taper (DIN 1806). . . . . . . . . . . . . . . . ................. 21 R8 .. . . . . . . . . . . . . . . . . . . . . . . . .......................... 22 Accessories Coolant Adapters | Service Keys | Clamping Nuts. . . . .... 23 ISO 15488 (DIN 6499-B) Collet Chuck Accessories. . . . . . ...... 24 Mounting Fixtures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

MVS Connection Color Guide Detailed instructions and information regarding the MVS connection(s). 248 (249) Boring Head 248 (249) boring head that connects into the adapter shanks.

Clamping Elements Collet chucks for carbide shanks.

Coolant-Through Option Indicates that the product is coolant through.

Your safety and the safety of others is very important. This catalog contains important safety messages. Always read and follow all safety precautions. This triangle is a safety hazard symbol. It alerts you to potential safety hazards that can cause tool failure and serious injury. When you see this symbol in the catalog, look for a related safety message that may be near this triangle or referred to in the nearby text. There are safety signal words also used in the catalog. Safety messages follow these words: WARNING means that failure to follow the precautions in this message could result in tool failure and serious injury. NOTICE means that failure to follow the precautions in this message could result in damage to the tool or machine but not result in personal injury. NOTE and IMPORTANT are also used. These are important that you read and follow but are not safety-related.

Visit www.alliedmachine.com for the most up-to-date information and procedures.

B10-A: 2

BORING | Master Shanks with MVS Connection

Cylindrical Shanks 248 (249)

A

Metric (mm) MVS

L 3 min*

Shank

D 1

L 1

L 3 max* SK 40 SK 50 HSK-A 63 HSK-A 100 Weight (kg)

Connection

Style

Part No. 248136 248137 248138 248142 248143 248144 248145

15.00 85.00 37.00 18.00 100.00 52.00 23.00 117.00 69.00

— — — —

0.10 0.20 0.40 0.30 0.60 1.10 1.40

— — — —

5.00

12.00 29.00 42.00 67.00 92.00

Steel

22.00

M8 x 1

15.00 130.00 82.00 20.00 20.00 35.00 18.00 155.00 107.00 39.00 21.00 60.00 23.00 180.00 132.00 64.00 46.00 85.00

Carbide

23.00 242.00 194.00 126.00 108.00 147.00 154.00

Imperial (in) MVS

L 3 min*

Shank

D 1

L 1 L 3 max* SK 40 SK 50 HSK-A 63 HSK-A 100 Weight (lbs) Part No.

Connection

Style

248136 248137 248138 248142 248143 248144 248145

0.591 3.346 1.456 0.709 3.937 2.047 0.906 4.606 2.716

— — — —

0.220 0.440 0.881 0.661 1.322 2.425 3.086

— — — —

0.196 0.866

0.472 1.141 1.653 2.637 3.622 6.062

Steel

M8 x 1

0.591 5.118 3.228 0.787 0.787 1.377 0.709 6.102 4.212 1.535 0.826 2.362 0.906 7.086 5.196 2.519 1.811 3.346 0.906 9.527 7.637 4.960 4.251 5.787

Carbide

* L 3 dimensions apply to collet chucks. To guarantee good function, use only holding shanks of carbide metal for the shrinkage chucks.

NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

B10: ix - x

B10-F: 5

Key on B10-A: 2

= Metric (mm) = Imperial (in)

B10-A: 3

www.alliedmachine.com | 1.330.343.4283

BORING | Master Shanks with MVS Connection

Cylindrical Shanks Carbide Straight

A

Metric (mm)

L 3 min

MVS Connection

Shank

D 4 | D 3 18 - 11

D 1

L 1

L 3 max

SK 40

SK 50 HSK-A 63 HSK-A 100 Weight (kg)

Part No. 299009* 299001* 299002* 299003* 299004* 299005* 299006** 299007** 299008**

18.00 155.00 107.00 39.00

26.00 28.00 56.00

60.00 45.00

67.00 52.00

0.50 0.70 0.90 1.10 1.00 1.30 2.10 2.60 5.20

140.00 92.00

28.00

190.00 142.00 74.00

95.00 102.00

22 - 11

22.00

231.00 183.00 115.00 97.00 136.00 143.00

165.00 117.00 49.00 215.00 167.00 99.00

36.00

70.00

77.00

25 - 14

25.00

81.00 120.00 127.00

210.00 260.00

— —

136.00 136.00 139.00 137.00 186.00 186.00 189.00 187.00

32 - 18 40 - 22

32.00

40.00 415.00

— —

333.00

—

333.00

NOTE: Adapter shanks are used for extensions up to 10xD. * Recommended clamping element: collet chuck ISO 15488 (DIN 6499-B) (pg. B10-J: 7). ** Recommended clamping element: collet chuck ISO 10897 (DIN 6388) (pg. B10-J: 6). Imperial (in) MVS Connection Shank L 3 min D 4 | D 3 D 1 L 1 L 3 max SK 40

SK 50 HSK-A 63 HSK-A 100 Weight (lbs)

Part No. 299009* 299001* 299002* 299003* 299004* 299005* 299006** 299007** 299008**

18 - 11

0.709

6.102 5.512 7.480 9.049 6.496 8.465 8.268

4.213 3.622 5.591 7.205 4.606 6.575

1.535 1.102 2.913 4.528 1.929 3.898 5.354 7.323

1.024 1.102 2.205 3.819 1.417 3.189 5.354 7.323

2.362 1.772 3.740 5.354 2.756 4.724 5.572 7.441

2.638 2.047 4.016 5.630 3.031 5.000 5.394 7.362

1.102 1.543 1.984 2.425 2.205 2.866 4.630 5.732

22 - 11

0.866

25 - 14

0.984

- - -

32 - 18 40 - 22

1.260

10.236

1.575 16.399

-

13.110

-

13.110

11.460

NOTE: Adapter shanks are used for extensions up to 10xD. * Recommended clamping element: collet chuck ISO 15488 (DIN 6499-B) (pg. B10-J: 7). ** Recommended clamping element: collet chuck ISO 10897 (DIN 6388) (pg. B10-J: 6).

NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

B10: ix - x

B10-J: 6 - 7

Key on B10-A: 2

= Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

B10-A: 4

BORING | Master Shanks with MVS Connection

HSK Master Shanks (DIN 69893) Balanced

A

*X 1 : with one-piece clamping nut

Metric (mm)

HSK-A

MVS Connection

Shank

D

D 4 | D 3 40 - 22 50 - 28 40 - 22 50 - 28 25 - 14 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 ER 40 50 - 28 50 - 28*

X 1

L 1

L 2

D 5 — — — — — — — — — — — — — — — — — —

Weight (kg)

Part No. 246016 246004 246015 245011 246012 246013 246014 245012 245013 246009 245014 246020 246021 245015 246019 246022 245016 246018 246023 246010 246017 252090** 252091**

56.00 70.00 56.00 65.00 46.00 56.00 56.00 65.00 80.00 80.00

— —

— — — — — — — — — — — — — — — — — — — — —

0.40 0.70 0.60 0.80 0.70 0.80 0.80 1.10 1.50 2.10 1.70 2.40 5.00 4.00 2.90 7.80 7.80 3.70

40

30.00

50

—

20.00 30.00 30.00 39.00

63

— —

120.00 65.00 180.00 180.00 80.00 205.00 205.00 80.00 255.00 255.00 100.00 300.00 120.00

94.00 36.00 151.00 151.00 51.00 176.00 176.00 51.00 226.00 226.00

95.00

63.00

60.00

63 - 36

78.00

100

80 - 36

90.00

12.60 10.40

— —

5.00

100 - 56

17.50

ER 40

91.00

88.00

63.00

3.50

NOTE: Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg. * D 4 = 49.50 mm ** Balanced without clamping nut.

NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

B10: ix - x Key on B10-A: 2

= Metric (mm) = Imperial (in)

B10-A: 5

www.alliedmachine.com | 1.330.343.4283

BORING | Master Shanks with MVS Connection

HSK Master Shanks (DIN 69893) Balanced

A

*X 1 : with one-piece clamping nut

Imperial (in)

Taper Size

MVS Connection

Shank

D

D 4 | D 3 40 - 22 50 - 28 40 - 22 50 - 28 25 - 14 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 ER 40 50 - 28 50 - 28*

X 1

L 1

L 2

D 5 — — — — — — — — — — — — — — — — — —

Weight (lbs)

Part No. 246016 246004 246015 245011 246012 246013 246014 245012 245013 246009 245014 246020 246021 245015 246019 246022 245016 246018 246023 246010 246017 252090** 252091**

2.205 2.756 2.205 2.559 1.811 2.205 2.205 2.559 3.150 3.150 4.724 2.559 7.087 7.087 3.150 8.071 8.071 3.150 10.03 10.03 3.937

— —

— — — — — — — — — — — — — — — — — — — — —

0.881 1.543 1.322 1.763 1.543 1.763 1.764 2.425 3.306 4.629 3.747 5.291

40

1.181

50

—

0.787 1.181 1.181 1.535 3.700 1.417 5.944 5.944 2.007 6.929 6.929 2.007 8.897 8.897 — —

63

3.740

2.480

2.362

11.020 6.393 6.393 17.190 17.190 8.157 27.770 22.920 11.020 38.580 7.716

63 - 36

3.070

100

80 - 36

3.543

— —

100 - 56

11.810 4.724

ER 40

3.582

3.464

2.480

NOTE: Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg. * D 4 = 49.50 mm ** Balanced without clamping nut.

NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

B10: ix - x Key on B10-A: 2

= Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

B10-A: 6

BORING | Master Shanks with MVS Connection

Polygon Shaft Master Shanks (PSC) (ISO 26623-1) Balanced

A

Metric (mm)

PSC

MVS Connection

Shank

D

D 4 | D 3 40 - 22 50 - 28 63 - 36 80 - 36 25 - 14 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 50 - 28 63 - 36 80 - 36 100 - 56

X 1

L 1

Weight (kg)

Part No. 227014 227001 227002 227012 227010 227009 227008 227003 227004 227005 227011 227006 227007 227013

54.00 65.00 80.00 80.00 54.00 54.00 65.00 65.00 80.00 80.00 65.00 80.00 80.00

31.10

0.70 1.00 1.50 2.50 0.90 1.00 1.10 1.30 1.80 2.60 2.20 2.60 3.30 4.74

— — —

50

21.10 23.00 36.40 39.00

63

— —

25.00 45.10

80

— —

100.00

NOTE: Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg.

B10: ix - x Key on B10-A: 2 NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

= Metric (mm) = Imperial (in)

B10-A: 7

www.alliedmachine.com | 1.330.343.4283

BORING | Master Shanks with MVS Connection

Polygon Shaft Master Shanks (PSC) (ISO 26623-1) Balanced

A

Imperial (in)

PSC

MVS Connection

Shank

D

D 4 | D 3 40 - 22 50 - 28 63 - 36 80 - 36 25 - 14 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 50 - 28 63 - 36 80 - 36 100 - 56

X 1

L 1

Weight (lbs)

Part No. 227014 227001 227002 227012 227010 227009 227008 227003 227004 227005 227011 227006 227007 227013

2.126 2.559 3.150 3.150 2.126 2.126 2.559 2.559 3.150 3.150 2.559 3.150 3.150 3.937

1.224

1.543 2.205 3.307 5.512 1.984 2.205 2.425 2.866 3.968 5.732 4.850 5.732 7.275

— — —

50

0.838 0.917 1.433 1.555

63

— —

1.047 1.783

80

— —

10.450

NOTE: Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg.

B10: ix - x Key on B10-A: 2 NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

= Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

B10-A: 8

BORING | Master Shanks with MVS Connection

Dual Contact BT Master Shanks (JIS B 6339)

A

Metric (mm)

MVS Connection

Shank

D 10

D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56 D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56

X 1

L 1

Taper Size

Weight (kg)

Part No. 353070 353071 353072 353073 353074 353075 Part No. 353070 353071 353072 353073 353074 353075

54.00 64.00 65.00 75.00 75.00 90.00

27.00 37.00 26.80 36.80 36.80 51.80

1.20 1.50 4.00 4.20 4.80 5.50

40

M16 x 2

50

M24 x 3

Imperial (in)

MVS Connection

Shank

D 10

X 1

L 1

Taper Size

Weight (lbs)

2.126 2.520 2.559 2.953 2.953 3.543

1.063 1.457 1.055 1.449 1.449 2.039

2.646 3.308 8.820 9.261

40

M16 x 2

50

M24 x 3

10.584 12.128

B10: ix - x Key on B10-A: 2 NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

= Metric (mm) = Imperial (in)

B10-A: 9

www.alliedmachine.com | 1.330.343.4283

BORING | Master Shanks with MVS Connection

BT Master Shanks (JIS B 6339) Balanced

A

*X 1 : with one-piece clamping nut

Metric (mm)

MVS Connection

Shank

D 10

D 4 | D 3 40 - 22 50 - 28 40 - 22 50 - 28 63 - 36 ER 40

X 1

L 1

L 2

D 5 — — — — —

Taper Size

Weight (kg)

Part No. 327012 327013 327016 327019 327020 259081* 327021 327029** 327036** 327030** 327037** 327031** 327038** 327032** 259082* 327022 327023 327024

40.00 46.00 46.00 54.00 64.00 70.00 65.00

18.00

— — — — — — — — — — — — — — — —

0.50 0.60 1.10 1.20 1.50 1.20 3.90 7.00 5.90 4.20 9.90 7.80 4.70

30

M12 x 1.75

—

19.00 27.00

40

M16 x 2

—

43.00 26.80 166.80 166.80 36.80 186.80 186.80 36.80 236.80 236.80 251.80 41.80 —

104.00

63.00

—

205.00 205.00 75.00 225.00 225.00 75.00 275.00 275.00 90.00 290.00 80.00

60.00 49.50

50 - 28

—

63 - 36

78.00

— — — — —

50

M24 x 3

80 - 36

90.00

14.80 14.80

5.50

100 - 56

17.30

ER 40

135.00

63.00

3.80

NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg. *Balanced without clamping nut. **Available upon request.

NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

B10: ix - x Key on B10-A: 2

= Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

B10-A: 10

BORING | Master Shanks with MVS Connection

BT Master Shanks (JIS B 6339) Balanced

A

*X 1 : with one-piece clamping nut

Imperial (in)

MVS Connection

Shank

D 10

D 4 | D 3 40 - 22 50 - 28 40 - 22 50 - 28 63 - 36 ER 40

X 1

L 1

L 2

D 5 — — — — —

Taper Size

Weight (lbs)

Part No. 327012 327013 327016 327019 327020 259081* 327021 327029** 327036** 327030** 327037** 327031** 327038** 327032** 259082* 327022 327023 327024

1.575 1.811 1.811 2.126 2.520 2.755 2.559 8.071 8.071 2.953 8.858 8.858 2.953

0.710

— — — — — — — — — — — — — — — —

1.102 1.323 2.425 2.646 3.307 2.645 8.599

30

M12 x 1.75

—

0.750 1.060 1.692 1.060 6.567 6.567 1.449 7.354 7.354 1.449 9.323 9.323 9.913 1.645 — —

40

M16 x 2

4.094

2.480

—

2.362 1.949

15.435 13.010 9.261 21.830 17.199 10.363 32.634 32.634 12.127 38.147 8.377

50 - 28

—

63 - 36

3.071

— — — — —

50

M24 x 3

80 - 36

10.827 10.827 3.543 11.417 3.149

3.543

100 - 56

ER 40

5.314

2.480

NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg. *Balanced without clamping nut. **Available upon request.

B10: ix - x Key on B10-A: 2 NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

= Metric (mm) = Imperial (in)

B10-A: 11

www.alliedmachine.com | 1.330.343.4283

BORING | Master Shanks with MVS Connection

Dual Contact SK Master Shanks (DIN 69871-AD / B -D)

A

Metric (mm)

MVS Connection

Shank

D 10

D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56 D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56

X 1

L 1

Taper Size

Weight (kg)

Part No. 353064 353065 353066 353067 353068 353069 Part No. 353064 353065 353066 353067 353068 353069

46.00 66.00 46.00 56.00 56.00 90.00

26.90 46.90 26.90 36.90 36.90 70.90

1.10 1.50 2.90 3.20 3.70 5.30

40

M16 x 2

50

M24 x 3

Imperial (in)

MVS Connection

Shank

D 10

X 1

L 1

Taper Size

Weight (lbs)

1.811 2.598 1.811 2.205 2.205 3.543

1.059 1.846 1.059 1.453 1.453 2.791

2.426 6.395 6.395 7.056 8.159

40

M16 x 2

50

M24 x 3

11.687

B10: ix - x Key on B10-A: 2 NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

= Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

B10-A: 12

BORING | Master Shanks with MVS Connection

SK Master Shanks (DIN 69871-AD / B -D) Balanced

A

*X 1 : with one-piece clamping nut

Metric (mm)

MVS Connection

Shank

D 10

D 4 | D 3 40 - 22 50 - 28 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 ER 40 50 - 28 50 - 28*

X 1

L 1

L 2

D 5 — — — — — — — — — — — — — —

Taper Size

Weight (kg)

Part No. 327001 327002 327003 327004 327005 327006 327007 327017 327025 327033 327018 327026 327034 327010 327027 327035 327011 327028 259079** 259080**

46.00 58.00 55.00 46.00 46.00 66.00 66.00 80.00 46.00

26.90

— — — — — — — — — — — — — — — — — —

0.50 0.80 1.10 1.00 1.10 1.40 1.90 1.30 2.90 6.00 4.90 3.20 8.90 6.90 3.70

30

M12 x 1.75

—

35.90 26.90 26.90 46.90

40.00

40

M16 x 2

—

60.90 26.90 166.90 166.90 36.90 186.90 186.90 36.90 236.90 236.90 270.90 55.20 —

116.00

63.00

186.00 186.00 56.00 206.00 206.00 56.00 256.00 256.00 90.00 290.00 80.00

60.00

63 - 36

78.00

50

M24 x 3

80 - 36

90.00

13.60 11.50

5.30

100 - 56

17.10

ER 40

134.00

63.00

3.10

NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg. * D 4 = 49.50 mm **Balanced without clamping nut.

NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

B10: ix - x Key on B10-A: 2

= Metric (mm) = Imperial (in)

B10-A: 13

www.alliedmachine.com | 1.330.343.4283

BORING | Master Shanks with MVS Connection

SK Master Shanks (DIN 69871-AD / B -D) Balanced

A

*X 1 : with one-piece clamping nut

Imperial (in)

MVS Connection

Shank

D 10

D 4 | D 3 40 - 22 50 - 28 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 ER 40 50 - 28 50 - 28*

X 1

L 1

L 2

D 5 — — — — — — — — — — — — — —

Taper Size

Weight (lbs)

Part No. 327001 327002 327003 327004 327005 327006 327007 327017 327025 327033 327018 327026 327034 327010 327027 327035 327011 327028 259079** 259080**

1.811 2.283 2.165 1.811 1.811 2.598 2.598 3.149 1.811 7.323 7.323 2.205 8.110 8.110 2.205

1.059

— — — — — — — — — — — — — — — — — —

1.103 1.764 2.426 2.205 2.426 3.087 4.190 2.860 6.395

30

M12 x 1.75

—

1.413 1.059 1.059 1.846 2.397 1.059 6.571 6.571 1.453 7.358 7.358 1.453 9.327 9.327 —

1.575

40

M16 x 2

4.566

2.480

2.362

13.230 10.805 7.056 19.625 15.215 8.159 29.988 25.353 11.687 37.706 6.834

63 - 36

3.071

50

M24 x 3

80 - 36

10.079 10.079 3.543 11.417 3.149

3.543

—

100 - 56

10.665 2.173

ER 40

5.275

2.480

NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg. * D 4 = 49.50 mm **Balanced without clamping nut.

NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

B10: ix - x Key on B10-A: 2

= Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

B10-A: 14

BORING | Master Shanks with MVS Connection

Dual Contact CAT Master Shanks with Imperial Threads

A

Metric (mm)

MVS Connection

Shank

D 9

D 10

D 4 | D 3 50 - 28 63 - 36 50 - 28 50 - 28*

X 1

L 1

L 2

Taper Size

Weight (kg)

Part No. 353062 353076 353063 353061 353077 353078 353079 353060 353080 353081 353082 Part No. 353062 353076 353063 353061 353077 353078 353079 353060 353080 353081 353082

62.00 137.00 82.00 62.00 202.00 72.00 222.00 72.00 272.00 105.00 305.00

42.95 117.95 62.95 42.95 182.95 52.95 202.95 52.95 252.95 85.95 285.95

— — —

1.30 2.40 1.80 3.30 5.30 3.60 7.10 4.10

40

44.45

5/8 - 11

27.00 167.00 37.00 187.00

63 - 36

50

69.85

1 - 8

— — — —

80 - 36

11.90

6.00

100 - 56

17.90

* D 4 = 49.50 mm Imperial (in)

MVS Connection

Shank

D 9

D 10

D 4 | D 3 50 - 28 63 - 36 50 - 28 50 - 28*

X 1

L 1

L 2

Taper Size

Weight (lbs)

2.440 5.394 3.228 2.440 7.953 2.835 8.740 2.834

1.691 4.644 2.478 1.691 7.203 2.085 7.990 2.085 9.959 3.384

— — —

2.866 5.292 3.968 7.275 11.687 7.938 15.656 9.039 26.240 13.230 39.470

40

1.750

5/8 - 11

1.062 6.575 1.457 7.362

63 - 36

50

2.750

1 - 8

— — — —

80 - 36

10.709 4.134 12.008

100 - 56

11.258

* D 4 = 49.50 mm

B10: ix - x Key on B10-A: 2 NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

= Metric (mm) = Imperial (in)

B10-A: 15

www.alliedmachine.com | 1.330.343.4283

BORING | Master Shanks with MVS Connection

CAT Master Shanks with Metric Threads

A

Metric (mm)

MVS Connection

Shank

D 9

D 10

D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56

X 1

L 1

L 2

Taper Size

Weight (kg)

Part No.

132022T016960 132066T016960 132022T016962 132066T016962 132088T016962 132076T016962

62.00 82.00 62.00 72.00 72.00

42.90 62.90 42.90 52.90 52.90 85.90

— —

1.30 1.80 3.40 3.70 4.20 5.20

40

44.45

M16 x 2

27.00 37.00

50

69.85

M24 x 3

— —

105.00

B10: ix - x Key on B10-A: 2 NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

= Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

B10-A: 16

BORING | Master Shanks with MVS Connection

CAT Master Shanks with Imperial Threads

A

Imperial (in)

MVS Connection

Shank

D 9

D 10

D 4 | D 3 40 - 22 50 - 28 25 - 14

X 1

L 1

L 2

D 5

Taper Size

Weight (lbs) Part No.

353001 353002 353011 353012 353013 353014 353003 353015 353004 353016 353005 353017 353006 353018 353007 353019 353025 353008 353023 353020 353009 353024 353021 353010 353022

2.362 2.756 2.165 5.551 2.559 6.732 2.165 6.378 2.441 5.394 3.228 6.181 2.165 6.378 2.441 7.953 7.953 2.835 8.740 8.740 2.835

1.612 2.006 1.415 4.800 1.809 5.982 1.415 5.628 1.691 4.644 2.478 5.431 1.415 5.628 1.691 7.203 7.203 2.085 7.990 7.990 2.085

— — — —

1.322 1.763 2.204 3.306 2.425 4.188 2.491 5.511 2.821 5.291 4.034 7.936 7.297 9.920 7.583

30

—

1/2 - 13

0.787 4.173 1.181 5.354 0.787

—

1.102

—

32 - 18

1.378

—

40 - 22

40

1.750 5/8 - 11

—

1.850

— — — — — — — —

50 - 28

63 - 36

0.787 5.000 1.063 6.575 6.575 1.457 7.362

—

40 - 22

1.850

—

50 - 28

2.362

14.100 11.680 8.223 15.650 20.500 9.413 26.230 31.300 13.600 39.460

50 - 28*

— — —

63 - 36

50

2.750

1 - 8

—

3.071

— — — — — — — — —

80 - 36

10.709 9.959 10.709 9.959

3.543

4.134

3.384

100 - 56

12.008 11.258

* D 4 = 49.50 mm

B10: ix - x Key on B10-A: 2 NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

= Metric (mm) = Imperial (in)

B10-A: 17

www.alliedmachine.com | 1.330.343.4283

BORING | Master Shanks with MVS Connection

NMTB Master Shanks

A

Metric (mm)

MVS Connection

Shank

D 9

D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56 D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56

X 1

L 1

Taper Size

Weight (kg)

Part No.

132022T004498 132066T004498 132022T004480 132066T004480 132088T004480 132076T004480

38.00 48.00 42.00 52.00 52.00 90.00

26.40 36.40 26.80 36.80 36.80 74.80

1.30 1.50 3.00 3.50 4.00 5.95

5/8 - 11

40

50

1 - 8

Imperial (in)

MVS Connection

Shank

D 9

X 1

L 1

Taper Size

Weight (lbs)

Part No.

132022T004498 132066T004498 132022T004480 132066T004480 132088T004480 132076T004480

1.496 1.890 1.654 2.047 2.047 3.543

1.039 1.433 1.060 1.450 1.450 2.945

2.900 3.300 6.600 7.700 8.800

40

5/8 - 11

50

1 - 8

13.118

B10: ix - x Key on B10-A: 2 NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

= Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

B10-A: 18

BORING | Master Shanks with MVS Connection

Straight Master Shanks

A

Imperial (in)

MVS Connection

Shank

D 4 | D 3 40 - 22 50 - 28 63 - 36 80 - 36

L 7

D 1

P 1

L 1

Weight (lbs)

Part No. K71547 K71548 K71549 K71550

3-1/2

1-1/4 1-1/2

1/8-27 NPTF 1/4-18 NPTF 1/4-18 NPTF 1/4-18 NPTF

5.080 5.810 6.700 6.700

1.764 3.086 5.952 7.716

4

4-1/2 4-1/2

2 2

B10: ix - x Key on B10-A: 2 NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

= Metric (mm) = Imperial (in)

B10-A: 19

www.alliedmachine.com | 1.330.343.4283

BORING | Master Shanks with MVS Connection

DIN 2080 Master Shanks

A

*X 1 : with one-piece clamping nut

Metric (mm)

MVS Connection

Shank

D 10

D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56

X 1

L 1

L 2

D 5

Taper Size

Weight (kg)

Part No.

132022T010229 132066T010229 132022T003704 132066T003704 132088T003704 132076T003704

38.00 48.00 42.00 52.00 52.00 90.00 80.00

26.20 36.20 26.80 36.80 36.80 74.80 64.80

— — — — — — — — — — — —

1.30 1.50 3.00 3.50 4.00 4.90 3.30

40

M16 x 2

50

M24 x 3

259084

ER 40

134.00

63.00

Imperial (in)

MVS Connection

Shank

D 10

D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56

X 1

L 1

L 2

D 5

Taper Size

Weight (lbs)

Part No.

132022T010229 132066T010229 132022T003704 132066T003704 132088T003704 132076T003704

1.496 1.889 1.653 2.047 2.047 3.543 3.149

1.031 1.425 1.055 1.448 1.448 2.945 2.551

— — — — — — — — — — — —

2.866 3.306 6.613 7.716 8.818

40

M16 x 2

50

M24 x 3

10.800 7.275

259084

ER 40

5.276

2.480

NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

B10: ix - x Key on B10-A: 2

= Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

B10-A: 20

BORING | Master Shanks with MVS Connection

Morse Taper Master Shanks (DIN 1806)

A

Metric (mm)

MVS Connection

Shank

D 4 | D 3 50 - 28 50 - 28 63 - 36

X 1

L 1

Morse Taper Size

Weight (kg)

Part No.

132022T003590 132022T003920 132066T003920

4 5

43.00 33.00 53.00

36.50 26.70 46.70

1.10 1.80 2.20

Imperial (in)

MVS Connection

Shank

D 4 | D 3 50 - 28 50 - 28 63 - 36

X 1

L 1

Morse Taper Size

Weight (lbs)

Part No.

132022T003590 132022T003920 132066T003920

4 5

1.693 1.299 2.087

1.440 1.050 1.840

2.425 3.968 4.850

B10: ix - x Key on B10-A: 2 NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

= Metric (mm) = Imperial (in)

B10-A: 21

www.alliedmachine.com | 1.330.343.4283

BORING | Master Shanks with MVS Connection

R8 Master Shanks

A

Metric (mm)

MVS Connection

Shank

D 4 | D 3 50 - 28 63 - 36

X 1

L 1

Weight (kg)

Part No.

132022T007166 132066T007166

45.00 60.00

36.00 51.00

1.00 1.30

Imperial (in)

MVS Connection

Shank

D 4 | D 3 50 - 28 63 - 36

X 1

L 1

Weight (lbs)

Part No.

132022T007166 132066T007166

1.770 2.362

1.417 2.008

2.204 2.866

B10: ix - x Key on B10-A: 2 NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

= Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

B10-A: 22

BORING | Master Shanks with MVS Connection

Accessories Coolant Adapters | Service Keys | Clamping Nuts

Coolant Adapter Sets HSK Thread G

L 2

A

D D 1

L 1

L 2

Part No. 262002 262003 262004 262005 262006 262007

L 1

32 40 50 63 80

M10 x 1.5 x 1.0 6.00 3.50 5.50 25.70 M12 x 1.75 x 1.0 8.00 5.00 7.50 29.20 M16 x 2 x 1.0 10.00 6.40 9.50 32.70 M18 x 2.5 x 1.0 12.00 8.00 11.50 36.20 M20 x 2.5 x 1.5 14.00 10.00 13.50 40.00 M24 x 3 x 1.5 16.00 12.00 15.50 43.60

D 1 D

G

100

Service Keys

D

HSK Shank Size

Part No. 315234 315235 215726 215727* 415127 215728

32 40 50 63 80

8.50

10.50 14.50 16.50 18.00 22.00

D

100

*Two piece

Type U (For use with coolant adapter set.)

D 1

ISO 15488 (DIN 6499-B) One-piece Clamping Nut Clamping Nut Nominal Size L 1 D 1

Part No. 215926

L 1

ER 40

25.50

63.00

215926

ER 40

1.004

2.480

D 1

ISO 15488 (DIN 6499-B) Sealing Disk One-piece Clamping Nut Sealing Disk Clamping Nut Nominal Size L 1 D 1

Part No. 278001

L 1

ER 40

34.00

63.00

278001

ER 40

1.339

2.480

= Metric (mm) = Imperial (in)

B10-A: 23

www.alliedmachine.com | 1.330.343.4283