B10-WHL_US-EN

BORING | Intermediate Modules

NOVI TECH® VibraƟon Damping Intermediate Modules Machining Diameter: 1.969" - 8.071" (50.00 mm - 205.00 mm)

A

X 1

B

D 3 D 4

D 2 D 1

C

X 1

L 1

D

D 4

D 2

D 1

D 3

E

F

MVS ConnecƟon

NOVI TECH

D 2 | D 1 50 - 28* 63 - 36 80 - 36 80 - 36 50 - 28* 63 - 36 80 - 36 80 - 36 100 - 56 100 - 56

D 4 | D 3 40 - 22 50 - 28 63 - 36 80 - 36 80 - 36 40 - 22 50 - 28 63 - 36 80 - 36 80 - 36

X 1

L 1

Weight

Part No. 519002 519003 519004 519005 519006 519002 519003 519004 519005 519006

7.874 7.874 7.874 7.874 7.874

- - - - - - - -

6.172 (lbs) 12.560 (lbs) 16.530 (lbs) 16.530 (lbs) 21.825 (lbs)

G

7.165

200.00 200.00 200.00 200.00 200.00

2.80 (kg) 5.70 (kg) 7.50 (kg) 7.50 (kg) 9.90 (kg)

H

182.00

I

* D 2 = 49.50 mm NOTE: The NOVI TECH intermediate module should always be assembled as close as possible to the cuƫng edge (i.e. the next component behind the boring head).

J

B10-M: 12-19

B10-F

B10: vi-vii

Key on B10-E: 1

K

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Refer to page B10-M: 12 for recommended applicaƟon-specific parameters. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com

L

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-E: 5