B10-WHL_US-EN

BORING | Intermediate Modules

Reducers Metric | Balanced

A

X 1

L 1

B

D 3

D 2 D 1

D 5 D 4

C

Balancing Screw

D

MVS ConnecƟon

Reducer

D 2 | D 1 25 - 14 25 - 14 32 - 18 32 - 18 40 - 22 40 - 22 40 - 22 50 - 28 50 - 28 50 - 28 50 - 28 50 - 28 50 - 28 50 - 28 50 - 28 50 - 28 50 - 28 50 - 28 50 - 28 50 - 28 50 - 28 50 - 28

D 4 | D 3

X 1

L 1

D 5

Weight 0.10 (kg) 0.20 (kg) 0.10 (kg) 0.10 (kg) 0.20 (kg) 0.20 (kg) 0.50 (kg) 0.40 (kg) 0.30 (kg) 0.40 (kg) 0.30 (kg) 0.40 (kg) 0.50 (kg) 0.90 (kg) 1.00 (kg) 0.90 (kg) 1.00 (kg) 1.10 (kg) 1.30 (kg) 0.50 (kg) 1.30 (kg) 1.00 (kg)

Balancing Screw

Part No. 219034 219035 219036 219037 219038 219039 219040 219051 219041 219052 119094 119054 119055 119010 219030* 219085 219086 119012 219032* 219087 219088 119059

19.5 - 11

30.00 30.00 12.00 30.00 12.00 30.00 30.00 54.00 14.00 54.00 14.00 59.00 59.00 119.00 119.00 109.00 109.00 109.00 49.00

21.00 21.00

- - - - - - - - - - -

- - - - - - -

22 - 11 22 - 11 25 - 14 22 - 11 25 - 14 32 - 18 22 - 11 22 - 11 25 - 14 25 - 14 25 - 14 25 - 14 25 - 14 32 - 18 32 - 18 32 - 18 32 - 18 40 - 22 40 - 22 63 - 36

E

0.50

21.00

0.50

21.00

-

40.00

F

19.5 - 11

41.00

M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 7 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10

0.50

41.00

0.50

46.00 46.00

G

32.00 32.00 36.00 35.00 35.00 40.00 46.00

106.00 106.00

36.00 96.00 96.00 96.00 27.00 87.00

H

40.00

-

100.00

47.00

50.00

-

-

I

*Reinforced reducer. NOTE: Balance refers to a specific residual imbalance of ≤ 10 g mm/kg.

J

B10-M: 12-19

B10-F

B10: vi-vii

Key on B10-E: 1

K

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Refer to page B10-M: 12 for recommended applicaƟon-specific parameters. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com

L

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-E: 9