B10-WHL_US-EN

BORING | Master Shanks with MVS ConnecƟon

249 (248) Shanks Steel | Carbide

A

L 1

L 3

B

D 1

M8 x 1

C

Steel Shanks

L 3 min *

Shank

D

D 1

L 1

L 3 max* 1.456 2.047 2.716 37.00 52.00 69.00

Connection

SK 40+50

HSK-A 63

HSK-A 100

Weight

Part No. 248136 248137 248138 248136 248137 248138

M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1

0.591 0.709 0.906 15.00 18.00 23.00

3.346 3.937 4.606

- - - - - -

-

-

0.220 (lbs) 0.440 (lbs) 0.881 (lbs)

0.196 0.866

0.472 1.141

E

85.00

-

-

0.10 (kg) 0.20 (kg) 0.40 (kg)

100.00 117.00

5.00

12.00 29.00

22.00

* L 3 dimensions apply to collet chucks.

L 1

F

L 3

G

D 1

M8 x 1

H

Carbide Shanks

L 3 min*

Shank

D 1

L 1

L 3 max* 3.228 4.212 5.196 7.637

Connection

SK 40 0.787 1.535 2.519 4.960 20.00 39.00 64.00

SK 50 0.787 0.826 1.811 4.251 20.00 21.00 46.00

HSK-A 63

HSK-A 100

Weight

Part No. 248142 248143 248144 248145 248142 248143 248144 248145

I

M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1

0.591 0.709 0.906 0.906 15.00 18.00 23.00 23.00

5.118 6.102 7.086 9.527

1.377 2.362 3.346 5.787 35.00 60.00 85.00

1.653 2.637 3.622 6.062 42.00 67.00 92.00

0.661 (lbs) 1.322 (lbs) 2.425 (lbs) 3.086 (lbs)

J

130.00 155.00 180.00 242.00

82.00

0.30 (kg) 0.60 (kg) 1.10 (kg) 1.40 (kg)

107.00 132.00 194.00

126.00

108.00

147.00

154.00

* L 3 dimensions apply to collet chucks.

K

B10-M: 12-19

B10-A: 30

B10: vi-vii

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-F: 2

www.alliedmachine.com | 1.330.343.4283