B10-WHL_US-EN

BORING | Master Shanks with MVS ConnecƟon

NMTB Master Shanks

A

X 1

L 1

B

D 9

D 3 D 4

C

D

ConnecƟon

Shank

D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56

X 1

L 1

D 9

Taper Size

Weight

Part No.

5/8 - 11 5/8 - 11

132022T004498 132066T004498 132022T004480 132066T004480 132088T004480 132076T004480 132022T004498 132066T004498 132022T004480 132066T004480 132088T004480 132076T004480

40 40 50 50 50 50 40 40 50 50 50 50

1.496 1.890 1.654 2.047 2.047 3.543 38.00 48.00 42.00 52.00 52.00 90.00

1.039 1.433 1.060 1.450 1.450 2.945 26.40 36.40 26.80 36.80 36.80 74.80

2.900 (lbs) 3.300 (lbs) 6.600 (lbs) 7.700 (lbs) 8.800 (lbs) 10.800 (lbs)

E

1 - 8 1 - 8 1 - 8 1 - 8

5/8 - 11 5/8 - 11

1.30 (kg) 1.50 (kg) 3.00 (kg) 3.50 (kg) 4.00 (kg) 4.90 (kg)

F

1 - 8 1 - 8 1 - 8 1 - 8

G

H

I

J

K

B10-M: 12-19

B10: vi-vii

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-F: 14

www.alliedmachine.com | 1.330.343.4283