B10-WHL_US-EN

BORING | Master Shanks with MVS ConnecƟon

DIN 1806 Morse Taper Master Shanks | R8 Master Shanks

A

X 1

L 1

B

D 3 D 4

C

DIN 1806 Master Shanks

D

Connection

Shank

D 4 | D 3 50 - 28 50 - 28 63 - 36 50 - 28 50 - 28 63 - 36

X 1

L 1

Morse Taper Size

Weight

Part No.

132022T003590 132022T003920 132066T003920 132022T003590 132022T003920 132066T003920

4 5 5 4 5 5

1.693 1.299 2.087 43.00 33.00 53.00

1.440 1.050 1.840 36.50 26.70 46.70

2.425 (lbs) 3.968 (lbs) 4.850 (lbs)

E

1.10 (kg) 1.80 (kg) 2.20 (kg)

F

X 1 L 1

G

D 3 D 4

H

7/16 - 20 UNF

I

R8 Master Shanks

Connection

Shank

D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36

X 1

L 1

Weight

Part No.

J

132022T007166 132066T007166 132022T007166 132066T007166

1.770 2.362 45.00 60.00

1.417 2.008 36.00 51.00

2.204 (lbs) 2.866 (lbs)

1.00 (kg) 1.30 (kg)

K

B10-M: 12-19

B10: vi-vii

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-F: 17