B10-WHL_US-EN

BORING | Large Diameter Boring

538 (537) Analog Cassettes Diameter Range: 3.937" - 128.150" (100.00 mm - 3255.00 mm)

A

A

85.6 mm

2.0 mm Hub

B

30 mm

C

Form 101

Form 20

D

Boring Range

Part No.

Slide Type

Weight

Insert Form Insert Holder

Clamping Piece

Cassette 538051 538051 538051 538051 538051 538051 538051 538051 538051 537051 537051 537051 537051 537051 537051 537051 537051 537051

A

210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064

137026 137026 137026 137027 137027 137027 137019 137019 137019 137026 137026 137026 137027 137027 137027 137019 137019 137019

3.937 - 8.071 3.937 - 8.071 3.937 - 8.071 7.874 - 40.157 7.874 - 40.157 7.874 - 40.157 19.685 - 128.150 19.685 - 128.150 19.685 - 128.150 100.00 - 205.00 100.00 - 205.00 100.00 - 205.00 200.00 - 1020.00 200.00 - 1020.00 200.00 - 1020.00 500.00 - 3255.00 500.00 - 3255.00 500.00 - 3255.00

1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs)

20

Serrated Tool Bodies

101 103

E

20

Basic / Eco Slides

101 103

20

F

Flex Slides

101 103

0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg)

20

Serrated Tool Bodies

101 103

G

20

Basic / Eco Slides

101 103

20

Flex Slides

101 103

H

I

J

K

B10-M: 12-15

B10-G: 20-21

B10-G: 16-19

B10-H

B10: vi-vii

Key on B10-G: 1

Inserts sold separately = Imperial (in) = Metric (mm)

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-G: 10

www.alliedmachine.com | 1.330.343.4283