B10-WHL_US-EN

BORING | Large Diameter Boring

MVS Holding Arbors

A

L 1

X 1

D 6

B

D 1

D 8

D 2

D 5

C

B 1

D

MVS Connection

Holding Arbor

Holding Arbor Connection D 40 Alu-Line

D 2 | D 1 80 - 36 80 - 36 100 - 56 100 - 56 100 - 56 80 - 36 80 - 36 100 - 56 100 - 56 100 - 56

Weight

Part No.

X 1

L 1

D 5

D 6

D 8

B 1

309001 (1)(2) 209060 (1) 309041 (2)

0.748 2.362 1.181 2.362 2.362 19.00 60.00 30.00 60.00 60.00

1.181 1.574 1.181 1.575 1.575 30.00 40.00 30.00 40.00 40.00

1.575 2.362 1.575 2.362 2.362 40.00 60.00 40.00 60.00 60.00

3.503 5.082 3.503 5.082 5.082

2.625 4.000 2.625 4.000 4.000

3.150 1.102 (lbs) 4.921 9.038 (lbs) 3.149 2.204 (lbs) 4.921 13.880 (lbs) 4.921 4.850 (lbs)

E

D 60

D 40 Alu-Line

209043

D 60

309043 (2)

D 60 Alu-Line

309001 (1)(2) 209060 (1) 309041 (2)

D 40 Alu-Line

89.00

66.70

80.00 0.50 (kg)

F

D 60

129.10

101.60 125.00 4.10 (kg)

D 40 Alu-Line

89.00

66.70

80.00 1.00 (kg)

209043

D 60

129.10 129.10

101.60 125.00 6.30 (kg) 101.60 125.00 2.20 (kg)

309043 (2)

D 60 Alu-Line

G

(1) For light machining only (2) Lightweight aluminum construction only in connection with our serrated slides Basic D 40 Serrated Slides: Ø 7.874" - 20.472" (200.00 - 520.00 mm) (Page B10-G: 4) Basic D 60 Serrated Slides: Ø 7.874" - 19.882" (200.00 - 505.00 mm) (Page B10-G: 5)

H

I

J

K

B10-M: 12-15

B10: vi-vii

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-G: 15