B10-WHL_US-EN

BORING | Large Diameter Boring

538 (537) Cassettes with 3E TECH+ Diameter Range: 3.937" - 128.150" (100.00 mm - 3255.00 mm)

A

A

85.6 mm

2.0 mm Hub

B

30 mm

C

Form 101

Form 20

D

Boring Range

Part No.

A

Slide Type

Weight

Insert Form Insert Holder

Clamping Pieces

Cassette 538052 538052 538052 538052 538052 538052 538052 538052 538052 537052 537052 537052 537052 537052 537052 537052 537052 537052

210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064

137026 137026 137026 137027 137027 137027 137019 137019 137019 137026 137026 137026 137027 137027 137027 137019 137019 137019

3.937 - 8.071 3.937 - 8.071 3.937 - 8.071 7.874 - 40.157 7.874 - 40.157 7.874 - 40.157 19.685 - 128.150 19.685 - 128.150 19.685 - 128.150 100.00 - 205.00 100.00 - 205.00 100.00 - 205.00 200.00 - 1020.00 200.00 - 1020.00 200.00 - 1020.00 500.00 - 3255.00 500.00 - 3255.00 500.00 - 3255.00

1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs) 1.323 (lbs)

20

Serrated Tool Bodies

101 103

E

20

Basic / Eco Slides

101 103

20

F

Flex Slides

101 103

0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg) 0.60 (kg)

20

Serrated Tool Bodies

101 103

G

20

Basic / Eco Slides

101 103

20

H

Flex Slides

101 103

I

3E TECH+ Digital Readout Module Part No. 536016 NOTE : WEEE-Reg.-Nr. DE 15820388 *Charging unit sold separately. Charging Unit* 536015

J

NOTE: 3E TECH+ adjustment accuracy of 0.0001" or 0.001 mm on diameter.

K

B10-M: 12-19

B10-G: 20-21

B10-G: 16-19

B10-H

B10: vi-vii

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

Inserts sold separately = Imperial (in) = Metric (mm)

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-G: 11