B10-WHL_US-EN

BORING | Large Diameter Boring

Master Shanks D 40 / D 60 HSK-A (DIN 69 893) Shanks

A

X 1

L 1

B 1

D 6

B

D 5

D 8

C

HSK-A (DIN 69 893) Shanks

D

Shank

X 1

L 1

D 5

D 6

D 8

B 1

Taper Size

Connection

Weight

Part No. 358015 258021 258061 258098 358015 258021 258061 258098

63

D 40 D 40 D 60 D 60 D 40 D 40 D 60 D 60

2.362 2.362 2.756 2.756 60.00 60.00 70.00 70.00

1.181 1.181 1.575 1.575 30.00 30.00 40.00 40.00

1.575 1.575 2.362 2.362 40.00 40.00 60.00 60.00

3.504 3.504 5.083 5.083 89.00 89.00

2.626 2.626 4.000 4.000 66.70 66.70

3.150 4.200 (lbs) 3.150 7.900 (lbs) 4.921 11.500 (lbs) 4.331 11.000 (lbs)

E

100 100 100

63

80.00 80.00

1.90 (kg) 3.60 (kg)

100 100 100

F

129.10 129.10

101.60 101.60

125.00 5.20 (kg) 110.00 5.00 (kg)

G

H

I

J

K

B10-M: 12-19

B10: vi-vii

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-G: 16

www.alliedmachine.com | 1.330.343.4283