B10-WHL_US-EN

BORING | Large Diameter Boring

SK (DIN 69 871-AD/B) | BT / JIS B 6339 Shanks Master Shanks D 40 / D 60

A

X 1

B 1

D 6

L 1

B

D 5

D 8

C

SK (DIN 69 871-AD/B) Shanks

Shank

D

X 1

L 1

D 5

D 6

D 8

B 1

Taper Size

Connection

Weight

Part No. 326080* K42796 326087 326088 326080* K42796 326087 326088

40 50 50 50 40 50 50 50

D 40 D 40 D 60 D 60 D 40 D 40 D 60 D 60

1.969 1.969 2.756 2.756 50.00 50.00 70.00 70.00

1.181 1.181 1.575 1.575 30.00 30.00 40.00 40.00

1.575 1.575 2.362 2.362 40.00 40.00 60.00 60.00

3.504 3.504 5.083 5.083 89.00 89.00

2.626 2.626 4.000 4.000 66.70 66.70

3.150 4.190 (lbs) 3.150 9.040 (lbs) 4.921 12.790 (lbs) 4.331 12.130 (lbs)

E

80.00 80.00

1.90 (kg) 4.10 (kg)

129.10 129.10

101.60 101.60

125.00 5.80 (kg) 110.00 5.50 (kg)

F

*For light machining only

X 1

L 1

G

B 1

D 6

D 5

D 8

H

BT / JIS B 6339 Shanks

I

Shank

X 1

L 1

D 5

D 6

D 8

B 1

Taper Size

Connection

Weight

Part No. 326084 326082 326062 326084 326082 326062

40 50 50 40 50 50

D 40 D 40 D 60 D 40 D 40 D 60

1.969 2.165 3.150 50.00 55.00 80.00

1.181 1.181 1.575 30.00 30.00 40.00

1.575 1.575 2.362 40.00 40.00 60.00

3.504 3.504 5.083 89.00 89.00 19.10

2.626 2.626 4.000 66.70 66.70

3.150 4.000 (lbs) 3.150 9.900 (lbs) - 17.600 (lbs)

J

80.00 80.00

1.80 (kg) 4.50 (kg) 8.00 (kg)

101.60

-

K

B10-M: 12-19

B10: vi-vii

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-G: 18

www.alliedmachine.com | 1.330.343.4283