B10-WHL

BORING | Large Diameter Boring

537 (538) Digital Fine Boring Cassettes with 3E TECH+ Diameter Range: 100.00 mm - 3255.00 mm (3.937" - 128.150")

NOTE: Vernier adjustment accuracy of 0.002 mm (0.0001") on diameter.

Metric (mm)

Cassette Part No.

Slide

Insert Holder

Boring Range (A) 100.00 - 205.00 100.00 - 205.00 100.00 - 205.00 200.00 - 1020.00 200.00 - 1020.00 200.00 - 1020.00 500.00 - 3255.00 500.00 - 3255.00 500.00 - 3255.00 3.937 - 8.071 3.937 - 8.071 3.937 - 8.071 7.874 - 40.157 7.874 - 40.157 7.874 - 40.157 19.685 - 128.150 19.685 - 128.150 19.685 - 128.150 Boring Range (A)

Type

Weight (kg)

Form Part No.

Clamping Piece

210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064 210020 210063 210064

137026 137026 137026 137027 137027 137027 137019 137019 137019 137026 137026 137026 137027 137027 137027 137019 137019 137019

0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60

20

101 103 101 103 101 103 20 20

Serrated Tool Bodies

537052

Basic / Eco Slides

Flex Slides

Imperial (in)

Cassette Part No.

Slide

Insert Holder

Type

Weight (lbs)

Form Part No.

Clamping Piece

1.323 1.323 1.323 1.323 1.323 1.323 1.323 1.323 1.323

20

101 103 101 103 101 103 20 20

Serrated Tool Bodies

538052

Basic / Eco Slides

Flex Slides

*Required serrated tool body sold separately. NOTE : Cassette and insert holder can be used on large diameter serrated slides. NOTE : 3E TECH+ digital readout module, charging unit, insert holders, inserts, and clamping pieces sold separately.

H

3E TECH+ Digital Readout Module Part No.

Charging Unit*

NOTE: 3E TECH+ digital adjustment accuracy of 0.001 mm (0.00005") on diameter.

536015

536016

NOTE : WEEE-Reg.-Nr. DE 15820388 *Charging unit sold separately.

NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

B10: ix - x

B10-H: 30

B10-I

Key on B10-H: 2

Inserts sold separately. = Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

B10-H: 28