B10-WHL_US-EN

BORING | Inserts

Wohlhaupter Insert Geometries Cermet | Carbide

A

B

Cermet | Carbide Geometry

Description

Application Available Form

• PosiƟve sintered geometry • Special cuƫng edge design in combinaƟon with the chip breaker design enables excepƟonal chip control even at shallow cuƫng depths and light feeds

C

155

F20, F101, F103, F39

F101, F103, F104, F105, F113, F114, F163

158

• Stable sintered geometry for roughing and finishing with and without disconƟnuous cuts

D

• Wiper geometry for highly producƟve turning and boring • Can be used with pitch angle 92° - 95° • Good chip breaking properƟes even at lower feed rates • Sintered version for a variety of applicaƟons • Low cuƫng pressure because of sharp cuƫng edge prep

174W

F101, F103

F39, F101, F103, F104, F112, F113, F163, F161, F262, F264

192

E

• PosiƟve sintered geometry for wide variety of applicaƟons • Special chip breaker allows chip control with different radial depth of cut

F101, F103, F104, F112, F113

199

F

• Highly posiƟve sintered geometry • Applicable for various material groups for low cuƫng pressure

F39, F101, F103, F104, F264

200

• Obliquely ground chip breaker reduces cuƫng forces • Finishing and smooth interrupted cuts

650

F20, F211

G

• NegaƟve geometry with 0 rake suitable for fine finishing and semi roughing • Machined materials in groups K and H • ConƟnuous and moderately interrupted cut

F101, F103, F104, F113, F163

711

• Parallel ground chip breaker • For finish operaƟons with stable cuƫng edge

H

840

F20

• Parallel ground chip breaker • Good chip control with short to medium feeds

850

F161

I

• Parallel ground chip breaker reduces cuƫng forces • Stable for a wide range of applicaƟons

F101, F103, F104, F105, F325

860

J

K

L

M

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-H: 11