B10-WHL_US-EN

BORING | Accessories / Technical InformaƟon

Guidelines for Not Exceeding Recommended Length-to-Diameter Ratio To calculate, see graphics below:

A

B

62 mm

100 mm 100 mm

100 mm 100 mm 72.5 mm

C

5

6

1

2

3

4

Ø50

Ø50

Ø50 Ø40

Ø50 Ø50

D

Too many components!

NOTE : Length-to-diameter raƟo is calculated using body diameters not cuƫng diameter. NOTE : Do not exceed recommended 10xD length-to-diameter raƟo or exceed four total components (including shank).

E

Step 1: Find L : D by component. 1.2 = 62/50 1

Step 2: Add each L : D average. 1.2 2.0 2.0 2.0 2.0 1.8 + 11.0 = L : D raƟo Too long with too many components!

2.0 = 100/50 2.0 = 100/50 2.0 = 100/50 2.0 = 100/50 1.8 = 72.5/40

F

2

3

4

5 6

G

H

Alu-Line Components

87.5 mm

62 mm

100 mm

I

1

2

3

J

Ø50

Ø50

Ø50

NOTE : Length-to-diameter raƟo is calculated using body diameters not cuƫng diameter. NOTE : Do not exceed recommended 5xD length-to-diameter raƟo when using Alu-Line (Aluminum) components or exceed four total components (including shank).

K

Step 1: Find L : D by component. 1.2 = 62/50 1

Step 2: Add each L : D average. 1.2 2.0 1.8 + 5.0 = L : D raƟo

2.0 = 100/50 1.8 = 87.5/50

L

2

3

M

Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed four total components (including shank). -When using Alu-Line components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo. WARNING

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH® module, do not exceed recommended 10xD length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-M: 8

www.alliedmachine.com | 1.330.343.4283