B10-WHL_US-EN

BORING | Accessories / Technical InformaƟon

Guidelines for Not Exceeding Recommended Length-to-Diameter Ratio To calculate, see graphics below:

A

B

Carbide Shank

63.5 mm

189 mm

C

1

2

Ø32

Ø32

D

NOTE : Length-to-diameter raƟo is calculated using body diameters not cuƫng diameter. NOTE : When using carbide shank components, do not exceed recommended 9xD length-to-diameter raƟo or exceed four total components.

E

Step 1: Find L : D by component. 8.1 = 189/32 2.0 = 63.5/32 1 2

Step 2: Add each L : D average. 5.9 2.0 + 7.9 = L : D raƟo

F

40 mm

NOVI TECH® Module

72.5 mm

200 mm

202 mm

G

1

2 3

4

H

Ø40

Ø49.5

Ø60

Ø50

I

NOTE : Length-to-diameter raƟo is calculated using body diameters not cuƫng diameter. NOTE : Do not exceed recommended 10xD length-to-diameter raƟo when using NOVI TECH® intermediate modules or exceed four total components (including shank). NOTE : The NOVI TECH® intermediate module should always be assembled as close as possible to the cuƫng edge (i.e. the next component behind the boring head).

Step 1: Find L : D by component. 3.3 = 202/60 0.8 = 40/50 1 2

Step 2: Add each L : D average. 3.3 0.8 4.0 1.8 + 9.9 = L : D raƟo

J

4.0 = 200/49.5 1.8 = 72.5/40

3

K

4

Component

Length-to -Diameter Ratio

Alu-Line Tool Steel

5xD 6xD 8xD 9xD

L

Heavy Metal

Carbide NOVI TECH®

10xD

M

Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed four total components (including shank). -When using Alu-Line components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo. WARNING

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH® module, do not exceed recommended 10xD length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-M: 10

www.alliedmachine.com | 1.330.343.4283