B10-WHL_US-EN

BORING | Fine Boring | 465 (464)

465 (464) Balance Digital 3E TECH+ Boring Heads Diameter Range: 1.142" - 2.579" (29.00 mm - 65.50 mm)

A

X 1

X 1R

B

91°

A

D 1 D 2 D 5

C

L 2

NOTE: Vernier adjustment accuracy of 0.0001" or 0.002 mm on diameter.

Form 101

Form 20

465 Balance Digital 3E TECH+ Boring Heads MVS Connection Boring Range

D

Boring Head

Part No.

D 2 | D 1 25 - 14 25 - 14 32 - 18 32 - 18 40 - 22 40 - 22

A

X 1

X 1R

L 2

D 5

Weight

Insert Form Insert Holder

Boring Head

210059 210069 264051 264077 210052 210062

465003 465003 465004 465004 465005 465005

1.142 - 1.496 1.142 - 1.496 1.496 - 1.969 1.496 - 1.969 1.969 - 2.579 1.969 - 2.579

2.205 2.205 2.598 2.598 2.953 2.953

- -

2.106 2.106 2.500 2.500 2.854 2.854

1.063 0.463 (lbs) 1.063 0.463 (lbs) 1.339 0.904 (lbs) 1.339 0.904 (lbs) 1.654 1.764 (lbs) 1.654 1.764 (lbs)

20

E

101

1.496 1.496 1.850 1.850

20

101

20

101

F

NOTE : X 1R = rotated insert holder for reverse machining. NOTE : 3E TECH+ module, charging unit, insert holders, and inserts sold separately.

464 Balance Digital 3E TECH+ Boring Heads MVS Connection Boring Range

Boring Head

Part No.

G

D 2 | D 1 25 - 14 25 - 14 32 - 18 32 - 18 40 - 22 40 - 22

A

X 1

X 1R

L 2

D 5

Weight 0.21 (kg) 0.21 (kg) 0.41 (kg) 0.41 (kg) 0.80 (kg) 0.80 (kg)

Insert Form Insert Holder

Boring Head

210059 210069 264051 264077 210052 210062

464003 464003 464004 464004 464005 464005

29.00 - 38.00 29.00 - 38.00 38.00 - 50.00 38.00 - 50.00 50.00 - 65.50 50.00 - 65.50

56.00 56.00 66.00 66.00 75.00 75.00

- -

53.50 53.50 63.50 63.50 72.50 72.50

27.00 27.00 34.00 34.00 42.00 42.00

20

101

38.00 38.00 47.00 47.00

20

H

101

20

101

NOTE : X 1R = rotated insert holder for reverse machining. NOTE : 3E TECH+ module, charging unit, insert holders, and inserts sold separately.

I

J

3E TECH+ Digital Readout Module Part No. 536016 NOTE : WEEE-Reg.-Nr. DE 15820388 *Charging unit sold separately. Charging Unit* 536015

K

NOTE: 3E TECH+ adjustment accuracy of 0.0001" or 0.001 mm on diameter.

L

B10-M: 12-19

B10-F

B10-H

B10: vi-vii

M

Key on B10-B: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

Inserts sold separately = Imperial (in) = Metric (mm)

25-14 32-18

IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Refer to page B10-M: 12 for recommended applicaƟon-specific parameters. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-B: 5