B15-TH_EU-EN

Tool Holders | Accessories

Quick Change Adapters A SK (DIN 69871) DIN ISO 7388-1

L 1

Ø D

D 2

D 3

L 3

L 2

Without Safety Connection | Through Coolant Shank Dimensions

B

Quick Change Adapter

Nominal Size

DIN 352

DIN 353

DIN 371

DIN 374

DIN 376

DIN 2182

DIN 2183

Torque Setting

D 2

D 3

L 1

L 2

L 3

D x

Part No. K24358 K24276 K24277 K24278 K24279 K24280 K24281 K24391 K23259 K18455 K22439 K16414 K16415 K16418 K16416 K18454 K16417 K22440 K15282 K15283 K15284 K18456 K16419 K15285 K16420 K15286 K18457 K22434 K22435 K22436 K22437 K16421 K16422 K16423 K16424

HSK-A (DIN 69893-1)

1/16 " 3/32 " 1/8 "

2.10 x 2.50 M 1 - M 1 - M 3.5 2.10 x 2.80 M 2 - M 2 M 4 M 4 2.70 x 3.50 M 3 - M 3 M 5 M 5

- 1.5 - 2

5/32 "

2 - 3

- 4 - 6

3.00 x 4.00 M 3.5 - M 3.5 - - - - 1.5 - 2

0

22 13

8

7 19.5

5/32 "

1/4 "

3.40 x 4.50 M 4 - M 4 M 6 M 6

6 - 9

4.90x6.00 M8 - - M8 M8 - - 16-21

1/4 " 5/16 " 3/32 " 1/8 "

3/8 " 7/16 " 5/32 "

5.50 x 7.00 M 10

G 1/8"

- M 10 M 10

27 - 32 16 - 21

6.20 x 8.00 - - M 8 - - 2.80 x 2.10 M 2 - M 2.8 M 4 M 4 3.50 x 2.70 M 3 - M 3.5 M 5 M 5

2 - 3

- 4 - 6

4.00 x 3.00 M 3.5 - M 3.5 - - - - 1.5 - 2

1 C BT (MAS 403) DIN ISO 7388-2 30 19

5/32 "

1/4 "

4.50 x 3.40 M 4 - M 4 M 6 M 6

6 - 9

6.00x4.90 M8 - - M8 M8 - - 16-21

7

10 21.5

1/4 " 5/16 " 3/8 "

3/8 " 7/16 " 1/2 " 9/16 " 3/8 " 7/16 " 1/2 " 9/16 " 5/8 "

7.00 x 5.50

M10 - - M10 M10

27 - 32 16 - 21 37 - 44 50 - 53 24 - 32 16 - 21 37 - 44

8.00 x 6.20 -

G 1/8"

M 8 - -

9.00 x 7.00 M 12 - - M 12 M 12

10.00 x 8.00 - - M 10 - - - - 27 - 32

11.00 x 9.00 M 14

G 1/4"

- M14 M14 -

7.00 x 5.50 M 10 G 1/8 "

1/4 " 5/16 " 3/8 "

- M 10 M 10

8.00 x 6.20 - - M 8 - - 9.00 x 7.00 M 12 - - M 12 M 12

10.00 x 8.00 - - M 10 - - - - 27 - 32

11.00 x 9.00 M 14 G 1/4 " 12.00 x 9.00 M 16 G 3/8 "

2

46 31 19 11 35.0

- M14 M14 - - M16 M16 -

50 - 53 55 - 58

11/16 " 85 - 90 13/16 " 110 - 115 15/16 " 110 - 115

14.00 x 11.00 M 18 - - M 18 M 18 -

16.00 x 12.00 M 20 G 1/2 "

- M20 M20 -

D CYLINDRICAL SHANK HOLDERS

18.00 x 14.50 M 24 - - M 24 M 24 -

11.00 x 9.00 M 14 G 1/4 " 12.00 x 9.00 M 16 G 3/8 "

9/18 " 5/8 "

- M14 M14 - - M16 M16 -

50 - 53 55 - 58

11/16 " 85 - 90 13/18 " 100 - 106 15/16 " 140 - 150

14.00 x 11.00 M 18 - - M 18 M 18 -

16.00 x 12.00 M 20 G 1/2 "

- M20 M20 -

3

68 48 30 14 55.5

18.00 x 14.50 M 24 - - M 24 M 24 -

20.00 x 16.50 M 27 G 3/4 " 22.00 x 18.00 M 30 G 7/8 " 25.00 x 20.00 M 33 G 1"

- M 27 M 27 - 1" 150 - 160 - M30 M30 - 1 1/8 " 240 - 250 - M33 M33 - 1 1/4 " 260 - 270

28.00 x 22.00 M 36 G 1 1/8 " - M36M36 - 1 3/8 " 260 - 270 K22438 NOTE: The quick change adapters are pre-set for machining steel with a tensile strength between 600 and 800 N/mm 2 . The tap shank must have a hardness of at least 40 HRC. If the torque has to be changed, this should be done at the factory for safety reasons.

E

ACCESSORIES

= Metric (mm)

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B15-E: 14