B15-TH_EU-EN

Tool Holders | Accessories

Quick Change Adapters

A SK (DIN 69871) DIN ISO 7388-1

L 2

L 1

D 3

D 2 ØD

L 3

L 4

With Safety Connection | Coolant Outside of Tap - Direct to Cutting Edge Shank Dimensions

B

Quick Change Adapter

Nominal Size

DIN 352

DIN 353

DIN 371

DIN 374

DIN 376

DIN 2182

DIN 2183

Torque Setting

D 2

D 3

L 1

L 2

L 3

L 4

D x

Part No. 234001 234002 234003 234004 234005 234006 234007 234008 234009 234020 234021 234022 234023 234024 234025 234026 234027 234028 234040 234041 234042 234043 234044 234045 234046 234047

HSK-A (DIN 69893-1)

1/8 "

3.50 x 2.70 M 3 - M 3.5 M 5 M 5

- 4 - 6

4.00 x 3.00 M 3.5 - M 3.5 - - - - 1.5 - 2

5/32 "

1/4 "

4.50 x 3.40 M 4 - M 4 M 6 M 6

6 - 9

6.00x4.90 M8 - - M8 M8 - - 16-21

7.00 x 5.50 M 10 G 1/8 "

1/4 " 5/16 " 3/8 "

3/8 " 7/16 " 1/2 " 9/16 " 3/8 " 7/16 " 1/2 " 9/16 " 5/8 "

1

32 19 25 26 17 46.5

- M 10 M 10

27 - 32 16 - 21 37 - 44 50 - 53 27 - 32 16 - 21 37 - 44

8.00 x 6.20 - - M 8 - - 9.00 x 7.00 M 12 - - M 12 M 12

10.00 x 8.00 - - M 10 - - - - 27 - 32

11.00 x 9.00 M 14 G 1/4 " 7.00 x 5.50 M 10 G 1/8 "

- M14 M14 -

1/4 " 5/16 " 3/8 "

- M 10 M 10

8.00 x 6.20 - - M 8 - - 9.00 x 7.00 M 12 - - M 12 M 12

C BT (MAS 403) DIN ISO 7388-2

10.00 x 8.00 - - M 10 - - - - 27 - 32

11.00 x 9.00 M 14 G 1/4 " 12.00 x 9.00 M 16 G 3/8 "

2

50 31 31 34 30 69.0

- M14 M14 - - M16 M16 -

50 - 53 55 - 58

11/16 " 85 - 90 13/16 " 110 - 115 15/16 " 110 - 115

14.00 x 11.00 M 18 - - M 18 M 18 -

16.00 x 12.00 M 20 G 1/2 "

- M20 M20 -

18.00 x 14.50 M 24 - - M 24 M 24 -

11.00 x 9.00 M 14 G 1/4 " 12.00 x 9.00 M 16 G 3/8 "

9/16 " 5/8 "

- M14 M14 - - M16 M16 -

50 - 53 55 - 58

11/16 " 85 - 90 13/16 " 100 - 160 15/16 " 140 - 150

14.00 x 11.00 M 18 - - M 18 M 18 -

16.00 x 12.00 M 20 G 1/2 "

- M20 M20 -

3

72 48 41 45 44 100.5

18.00 x 14.50 M 24 - - M 24 M 24 -

20.00 x 16.50 M 27 G 3/4 " 22.00 x 18.00 M 30 G 7/8 " 25.00 x 20.00 M 33 G 1" 28.00 x 22.00 M 36 G 1/8 "

- M 27 M 27 - 1" 150 - 160 - M30M30 - 1 1/8 " 240 - 250 - M33M33 - 1 1/4 " 260 - 270 - M36M36 - 1 3/8 " 260 - 270

D CYLINDRICAL SHANK HOLDERS

234048 NOTE: The quick change adapters are pre-set for machining steel with a tensile strength between 600 and 800 N/mm 2 . The tap shank must have a hardness of at least 40 HRC. If the torque has to be changed, this should be done at the factory for safety reasons.

D 1 D 1

D 2 D 3

L 2

L 1

E

Reducers for Quick Change Adapters 1 Tapping Chuck

2 Quick Change Adapter

3 Reducer

ACCESSORIES

D 1

D 1

D 1

D 2

D 3

L 1

L 2

Nominal Size

Nominal Size

Weight (kg)

Part No. 161038 162094

1 2

19.00 31.00

0 1

13.00 19.00

19.00 31.00

13.00 19.00

30.00 48.00

21.50 35.00

4.00 5.00

0.41 0.18

= Metric (mm)

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B15-E: 15