B10-WHL_EU-EN

BORING | Large Diameter Boring

Insert Holders for Rough Machining

A

90° Insert Holders Insert Holder

B

Insert Form

K

X 1

Weight

ISO Code CC..09T3.. CC..1204.. CC..1204.. CC..1605..

Part No. 149090 149099 149083 149093

90° 30.00 0.60 (kg) 90° 30.00 0.60 (kg) 90° 29.30 0.60 (kg) 90° 30.00 0.60 (kg)

103 104 104 105

K

C

X 1

D

E

90° TangenƟal Insert Holders Insert Holder

K

K

X 1

Weight

ISO Code TangenƟal TangenƟal

Insert Form

Part No. 149010 149020

90° 90°

30.00 0.60 (kg) 29.30 0.60 (kg)

05 05

F

X 1

G

80° Insert Holders Insert Holder

H

K

X 1

K

Weight

ISO Code SC..1204.. SC..150512 SN..1506..

Insert Form

Part No. 149089 149094 149096

80° 80° 80°

30.00 0.60 (kg) 30.00 0.60 (kg) 30.00 0.60 (kg)

113 114 134

I

X 1

J

K

B10-M: 12-13

B10-G: 22-25

B10-G: 16-19

B10-H

B10: VI-VII

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

Inserts sold separately = Metric (mm)

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com

INDEX

B10-G: 12

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

Made with FlippingBook Learn more on our blog