B10-WHL_EU-EN

BORING | Large Diameter Boring

Insert Holders for Rough Machining | Boring Range Examples

A

Chamfering Insert Holders Insert Holder

A 1

A

W

45°

Insert Form

Part No.

K X 1

A / A 1

W

Weight

ISO Code TC..16T3.. TC..16T3.. TC..16T3.. SC..1505..

B

201065 201025 201075 201015

15° 30.00 +7.00 4.00 0.60 (kg) 20° 30.00 +9.00 5.30 0.60 (kg) 30° 30.00 +14.00 7.70 0.60 (kg) 45° 30.00 +20.00 9.90 0.60 (kg)

163 163 163 114

X 1

K

W

C

X 1

K

D

Back-Boring Insert Holders Insert Holder

A

Insert Form

K X 1

X 2

A

Weight

ISO Code CC..1204.. CC..1204..

Part No. 251010 251011

90° 30.00 5.00 +40.00 0.80 (kg) 90° 30.00 5.00 +75.00 0.90 (kg)

104 104

E

X 1

X 2

K

F

K

A

OD Turning Insert Holders Insert Holder

Insert Form

L 1

K X 1

L 1

A

Weight

ISO Code CC..1204..

Part No. 149040

G

X 1

90° 90.00 62.00 -50.00 1.00 (kg)

104

Boring Range Examples

H

Serrated Slide

Insert Holder

Modified Bore Range

Total Bore Range

Part No.

Bore Range

Part No.

349051 200.00 - 280.00 201065 349051 200.00 - 280.00 251010 349051 200.00 - 280.00 149040

+7.00 207.00 - 287.00 +40.00 240.00 - 320.00

I

-50.00 150.00 - 230.00 NOTE : Boring range for serrated slides or base slides are found on pg. B10-G: 4 - 7. NOTE : AddiƟonal insert holders available upon request.

J

K

B10-M: 12-13

B10-G: 22-25

B10-G: 16-19

B10-H

B10: VI-VII

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

Inserts sold separately = Metric (mm)

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-G: 13

Made with FlippingBook Learn more on our blog