B10-WHL_EU-EN

BORING | Large Diameter Boring

MVS Holding Arbors D 40 / D 60

A

L 1

X 1

D 6

B

D 1

D 8

D 2

D 5

B 1

C

D

MVS ConnecƟon

Holding Arbor

Holding Arbor ConnecƟon D 40 Alu-Line

D 2 | D 1 80 - 36 80 - 36 100 - 56 100 - 56 100 - 56

X 1

L 1

D 5

D 6

D 8

B 1

Weight

Part No.

309001 (1)(2) 209060 (1) 309041 (2)

19.00 60.00 30.00 60.00 60.00

30.00 40.00 30.00 40.00 40.00

40.00 60.00 40.00 60.00 60.00

89.00

66.70

80.00 0.50 (kg)

D 60

129.10

101.60 125.00 4.10 (kg)

E

D 40 Alu-Line

89.00

66.70

80.00 1.00 (kg)

209043

D 60

129.10 129.10

101.60 125.00 6.30 (kg) 101.60 125.00 2.20 (kg)

309043 (2)

D 60 Alu-Line

(1) For light machining only. (2) Lightweight aluminium construcƟon only in connecƟon with our serrated slides: Basic D 40 Serrated Slides: Ø 200.00 mm - 520.00 mm (Page B10-G: 4). Basic D 60 Serrated Slides: Ø 200.00 mm - 505.00 mm (Page B10-G: 5).

F

G

H

I

J

K

B10-M: 12-13

B10: VI-VII

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-G: 15