B10-WHL_EU-EN
BORING | Large Diameter Boring
Master Shanks D 40 / D 60 HSK-A (DIN 69 893) Shanks
A
X 1
L 1
B 1
D 6
B
D 5
D 8
C
D
HSK-A (DIN 69 893) Shanks
Shank
X 1
L 1
D 5
D 6
D 8
B 1
Taper Size
ConnecƟon
Weight 1.90 (kg) 3.60 (kg)
Part No. 358015 258021 258061 258098
63
D 40 D 40 D 60 D 60
60.00 60.00 70.00 70.00
30.00 30.00 40.00 40.00
40.00 40.00 60.00 60.00
89.00 89.00
66.70 66.70
80.00 80.00
E
100 100 100
129.10 129.10
101.60 101.60
125.00 5.20 (kg) 110.00 5.00 (kg)
F
G
H
I
J
K
B10-M: 12-13
B10: VI-VII
Key on B10-G: 1
19.5-22 22-11
40-22 50-28 63-36 80-36 100-56
25-14 32-18
= Metric (mm)
L
Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING
M
-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.
-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com
INDEX
B10-G: 16
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
Made with FlippingBook Learn more on our blog