B10-WHL_EU-EN

BORING | Large Diameter Boring

SK (DIN 69 871-AD/B) | BT / JIS B 6339 Shanks Master Shanks D 40 / D 60

A

X 1

B 1

D 6

L 1

B

D 5

D 8

C

SK (DIN 69 871-AD/B) Shanks

Shank

X 1

L 1

D 5

D 6

D 8

B 1

D

Taper Size

ConnecƟon

Weight 1.90 (kg) 4.10 (kg)

Part No. 326080* K42796 326087 326088

40 50 50 50

D 40 D 40 D 60 D 60

50.00 50.00 70.00 70.00

30.00 30.00 40.00 40.00

40.00 40.00 60.00 60.00

89.00 89.00

66.70 66.70

80.00 80.00

129.10 129.10

101.60 101.60

125.00 5.80 (kg) 110.00 5.50 (kg)

*For light machining only.

E

F

X 1

L 1

B 1

D 6

G

D 5

D 8

H

BT / JIS B 6339 Shanks

Shank

X 1

L 1

D 5

D 6

D 8

B 1

Taper Size

ConnecƟon

Weight 1.80 (kg) 4.50 (kg) 8.00 (kg)

Part No. 326084 326082 326062

I

40 50 50

D 40 D 40 D 60

50.00 55.00 80.00

30.00 30.00 40.00

40.00 40.00 60.00

89.00 89.00 19.10

66.70 66.70

80.00 80.00

101.60

-

J

K

B10-M: 12-13

B10: VI-VII

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com

INDEX

B10-G: 18

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com