B10-WHL_EU-EN

BORING | Large Diameter Boring

Master Shanks D 60 NMTB Shanks | DIN 2080 Shanks

A

L 1

L 2

X 1

B 1

X 2

D 2

B

D 3

D 1

C

X 3

NMTB Shanks

Shank

X 1

X 2

L 1

L 2

D 1

X 3

D 2

D 3

B 1

D

Taper Size ConnecƟon

Weight

Part No.

198051T004480

50

D 60

126.80 3.20 29.00 40.00 60.00 12.50 101.60 25.40 M16 8.00 (kg)

E

F

X 1

L 1

D 6

G

D 8

D 5

H

DIN 2080 Shanks

Shank

X 1

L 1

D 5

D 6

D 8

B 1

Taper Size

ConnecƟon

Weight 6.80 (kg)

Part No. 326035

I

50

D 60

55.00

40.00

60.00

128.00

101.60

-

J

K

B10-M: 12-13

B10: VI-VII

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-G: 19