B10-WHL_EU-EN

BORING | Large Diameter Boring

537 Accessories | 3E TECH+ Accessories Accessories

A

B

2

1

1

2

C

537 Analogue CasseƩe

537 Digital CasseƩe

537 Accessories

1 Countersunk Screw

2 Clamping Screw

D

CasseƩe Part No.

Part No. 215462 215462

Service Key

Part No. 115249 315789

Service Key

T20 / H T20 / H

s4 / F s4 / F

537051 537052

E

F

3E TECH+ Accessories

1 Charging Unit Part No. 536016 NOTE : Charging unit sold separately from 3E TECH+ .

G

1 NOTE: 3E TECH+ adjustment accuracy of 0.001 mm on diameter.

H

1

I

3E TECH Accessories (Old Display) 1 Sealing Ring

2 BaƩery CR2032

2

Part No. 215483

Part No.

J

515491 NOTE: Not required for 3E TECH+ (new display).

K

B10-M: 12-13

B10: VI-VII

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

Inserts sold separately = Metric (mm)

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-G: 21