B10-WHL_EU-EN

BORING | Large Diameter Boring

537 Accessories Clamping Pieces | Counterweight | Insert Holders for Abrasive Materials

A

B

3

537 Clamping Pieces

C

Replacement Components

Complete Part No.

1 Cap Screw

2 Clamping Nut

3 Disk Spring

Slide Type

Service Key

137026 137027 137019

Serrated Tool Bodies Basic and Eco Slides

215101 215102 415900

140118 215105 215105

337105 337105 337105

115578

s6 / B

1

D

Flex Slides

2

E

537 Counterweight

F

Boring Range

Part No.

100.00 - 3255.00 537055 NOTE: Clamping pieces sold separately.

G

L 1

Insert Holders for Abrasive Materials

H

L 1

Boring Range

Weight 0.03 (kg) 0.03 (kg) 0.03 (kg)

Insert Form Part No.

92°

Form 101 Form 103

211061 211063 211065

100.00 - 3255.00 100.00 - 3255.00 100.00 - 3255.00

18.00 18.00 18.00

20

Chip guard

I

101 103

L 1

92°

J

Form 20

K

B10-M: 12-13

B10: VI-VII

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

Inserts sold separately = Metric (mm)

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com

INDEX

B10-G: 20

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com