TMPG_US-EN
Programming AccuThread ® T3
AccuThread T3 is designed to cut minimal threads at a time to reduce side deflection in hard or difficult-to-machine materials.
To improve rigidity, they are intended to be programmed to cut each thread starting at the top and progressing down in Z-axis. Because right hand threads are most common, AccuThread T3 thread mills are left hand cutting (M04) to maintain the climb milling method.
1 Spindle on | S5416 M04 T urn on spindle in counter-clockwise direction.
2 Lower tool | G91 G42 D1 Switch to incremental programming and turn on cutter compensation.
3 Position for arc on G01 X0.0314 Y0.0314 Z0 F23.6
Position tool for the arc on motion.
Y+ (J+)
X+ (I+)
X- (I-)
Y- (J-)
Example shows right hand thread.
20 | THREAD MILLING REFERENCE GUIDE
Made with FlippingBook - Online catalogs