TMPG_US-EN

Programming AccuThread ® T3

4 Arc on G02 X0.0314 Y-0.0314 Z-0.0063 I0 J-0.0314 F7.87

Arc on to engage the tool to the major thread Ø while moving the tool down in the Z-axis 1/8 pitch.

Y+ (J+)

X+ (I+)

X- (I-)

Y- (J-)

5 Full pass G02 X0 Y0 Z-0.0500 I-0.0628 J0

Interpolate the thread mill inside the major thread diameter while moving the tool down 1 pitch in the Z-axis.

Y+ (J+)

X+ (I+)

X- (I-)

Y- (J-)

CONTINUE

THREAD MILLING REFERENCE GUIDE | 21