TMPG_US-EN

Programming AccuThread ® T3

5A Repeat full pass G02 X0 Y0 Z-0.0500 I-0.0628 J0

Repeat interpolation the number of times to create length of thread needed. Use the length of thread / pitch and round the result to determine the number of Z-axis passes required.

Y+ (J+)

X+ (I+)

X- (I-)

Y- (J-)

6 Arc off G02 X-0.0314 Y-0.0314 Z-0.0063 I-0.0314 J0

Arc off to disengage the tool from the major thread Ø while moving the tool up in the Z-axis 1/8 pitch.

Y+ (J+)

X+ (I+)

X- (I-)

Y- (J-)

Example shows right hand thread.

22 | THREAD MILLING REFERENCE GUIDE