AMPC-E_CHS

螺纹加工 | 整体硬质合金和可转位螺纹铣刀

Thread Mill Programming Guide

A

AVAILABLE ONLINE 24/7 visit www.alliedmachine.com or download INSTA-CODE ®

What you need to know • Thread milling can be easily accomplished with simple G code programming • If your machine is capable of 3 axis (helical) interpolaƟon, you can and should be thread milling • Basic programming of a one pass thread mill can be achieved in 6 basic steps

钻削

The following are examples of how to calculate and program a M16x2 right hand thread that will be 10mm deep produced in one pass Major thread diameter 16mm Major diameter of thread Threads per inch (only applies to imperial threads) Length of thread 10mm Desired length of cut Velocity 221 M/min Recommended velocity for material to be cut Feed per flute 0.038mm/tooth Recommended feed rate per cuƫng edge Number of flutes 4 Number of flutes on tool to be used CuƩer diameter 11.94mm Diameter of cuƫng tool Using the information above, the values can be calculated: Pitch 2.0mm Use 1/ threads per inch for imperial Speed 5895 RPM (318.47 • M/min) / cuƩer diameter or (SFM • 3.82) / cuƩer diameter Linear feed 896.04mm/min RPM • (Feed per flute • Number of flutes) Feed rate for thread milling 227.37mm/min ((Major thread diameter - cuƩer diameter) / Major thread diameter) • Linear feed Z-axis travel on arc on 0.25mm (Pitch / 8) Z-axis travel for full thread 10.25mm (Pitch / 8) + Length of cut Arc on/off 1.015mm (Major thread diameter - cuƩer diameter) / 4 Full rotaƟon value 2.030mm (Major thread diameter - cuƩer diameter) / 2

B

镗孔

C

Major thread diameter

Feed rate for thread milling Z axis depth for full thread

Arc on/off value

16mm

227.37mm/min

1.015mm 2.030mm

铰孔

Cutter diameter

Full rotation value

11.94mm 10.00mm

10.25mm

Length of thread

Z axis for arc on/off

Pitch value

0.25mm

2.00mm

Begin and end posiƟon of CCW full rotaƟon Z to move up one pitch

N60: CCW arc to arc off posiƟon moving Z up 1/8 pitch

N40: CCW arc to full rotaƟon posiƟon moving Z up 1/8 pitch

D

抛光

N40 - N50

N60

N30

E

+ Y -

N10 - N20

螺纹加工

N70: Move to X and Y center

N30: Move to arc on posiƟon

N80: Rapid up in Z

X

特殊应用

- X +

www.alliedmachine.com | 1.330.343.4283

E: 64