AMPC-E_CHS

螺纹加工 | 整体硬质合金和可转位螺纹铣刀

A

5895

M03

S

Turn on spindle in the clockwise direcƟon.

钻削

N10

1

Lower tool the depth required plus an addiƟonal 1/8 pitch for the arc on. Tool remains in the center of the hole.

2

N20

G91

G01

Z -10.250

F 1136.25

PosiƟon the tool for the arc on moƟon and turn on the cuƩer compensaƟon.

N30

G41

X 1.015

Y 1.015

D1

F 681.75

Arc on to engage the tool to the major thread diameter while moving the tool up in the Z-axis 1/8 pitch. NOTE : X and Y is the end point. I and J is the center point of the arc.

3

B

N40

G03

X -1.015

Y 1.015

Z 0.250

I -1.015

J0.000

F 227.37

Full pass. Interpolate the thread mill inside the major thread diameter while moving the tool up 1 pitch in the Z axis.

镗孔

4

N50

G03

X 0.000

Y 0.000

Z 2.000

I 0.000

J -2.030

Arc off to disengage the tool from the major thread diameter while moving the tool up in the Z-axis 1/8 pitch.

N60

G03

X -1.015

Y -1.015

Z 0.250

I 0.000

J -1.015

F 909.00

5

Return to center. Turn off cuƩer compensaƟon and move the tool back to center.

N70

G40

G01

X 1.015

Y -1.015

F 1136.25

C

Return to top. Rapid the tool back to the top of the threaded hole.

N80

G00

Z 7.750

Switch back to absolute posiƟoning and rapid to a safe point in Z above part level (assumed to be 1 pitch above part level for demonstraƟon purposes below).

6

铰孔

N90

G90

D

抛光

E

螺纹加工

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

N10

N20

N30 - N40

N50

N60 - N70

N80 - N90

• Preparatory commands • PosiƟoning above hole center and at hole level in Z • In absolute posiƟon mode

• Change to incremental • Feed to boƩom of hole • Z axis depth for full thread

• AcƟvate leŌ cuƩer comp • Feed to arc on posiƟon • Arc to full rotaƟon value while moving Z up 1/8 pitch • Z axis move for arc on

• One complete CCW rotaƟon at full arc rotaƟon value while moving Z up 1 pitch value

• CCW arc from full

• Rapid up in Z

rotaƟon value to the arc on/off value while moving Z up 1/8 pitch (Z axis move for arc off)

X

特殊应用

www.alliedmachine.com | 1.330.343.4283

E: 65