B10-WHL_US-EN

BORING | Large Diameter Boring

538 (537) Accessories Clamping Pieces | Counterweights | Insert Holders for Abrasive Materials

A

B

C

3

538 (537) Clamping Pieces

Replacement Components

Complete Part No.

1 Cap Screw

2 Clamping Nut

3 Disk Spring

Slide Type

Service Key

D

137026 137027 137019

215101 21510 2 415900

140118 215105 215105

337105 337105 337105

Serrated Tool Bodies Basic and Eco Slides

115578

s6 / B

1

Flex Slides

2

E

F

538 (537) Counterweights

Boring Range 3.937 - 128.15

Part No. 538055

G

100.00 - 3255.00 537055 NOTE: Clamping piece sold separately.

H

L 1

Insert Holders for Abrasive Materials

I

L 1

Boring Range 3.937 - 128.150 3.937 - 128.150 3.937 - 128.150 100.00 - 3255.00 100.00 - 3255.00 100.00 - 3255.00

Weight

Insert Form Part No.

92°

Form 101 Form 103

211061 211063 211065 211061 211063 211065

0.708 0.708 0.708 18.00 18.00 18.00

0.066 (lbs) 0.066 (lbs) 0.066 (lbs)

20

Chip guard

101 103

L 1

J

0.03 (kg) 0.03 (kg) 0.03 (kg)

20

101 103

92°

Form 20

K

B10-M: 12-19

B10-H

B10: vi-vii

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

Inserts sold separately = Imperial (in) = Metric (mm)

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-G: 20

www.alliedmachine.com | 1.330.343.4283