B10-WHL_US-EN

BORING | Large Diameter Boring

538 (537) Accessories | 3E TECH+ Accessories Accessories

A

B

2

C

1

1

2

538 (537) Analog Cassette

538 (537) Cassette

538 (537) Accessories

D

1 Countersunk Screw

2 Clamping Screw

Cassette Part No.

Part No. 215462 215462 215462 215462

Service Key

Part No. 115249 315789 115249 315789

Service Key

T20 / H T20 / H T20 / H T20 / H

s4 / F s4 / F s4 / F s4 / F

538051 538052 537051 537052

E

F

3E TECH+ Accessories

1 Charging Unit Part No. 536016 NOTE : Charging unit sold separately from 3E TECH+ .

G

H

1 NOTE: 3E TECH+ adjustment accuracy of 0.0001" or 0.001 mm on diameter.

I

3E TECH (Old Display) Accessories 1 Sealing Ring

1

2 Battery CR2032

J

Part No. 215483

Part No.

515491 NOTE: Not required for 3E TECH+ (new display).

2

K

B10-M: 12-19

B10: vi-vii

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-G: 21