B10-WHL_US-EN

BORING | Large Diameter Boring

Serrated Slide Basic D 40 Accessories Clamping Pieces

A

1

B

3

C

Clamping pieces for 538 (537) cassettes and counterweights sold separately. (See page B10-G: 20).

2

D

Clamping Pieces

2 Clamping Nut

Serrated Slide

1 Cap Screw

3 Thread Pin

Cap Screw

E

Connection

Part No. 350021 350022 350023 350024 349021 349022 349023 349024

Part No. 115118 115118 115118 115118 115118 115118 115118 115118

Service Key

Part No. 115669 115669 115669 115669 115669 115669 115669 115669

Part No. 349010 349011 349012 349013 349010 349011 349012 349013

Service Key

Part No. 315186 315186 315186 315186 315186 315186 315186 315186

Service Key

D 40 D 40 D 40 D 40 D 40 D 40 D 40 D 40

s8 / B s8 / B s8 / B s8 / B s8 / B s8 / B s8 / B s8 / B

s4 / F s4 / F s4 / F s4 / F s4 / F s4 / F s4 / F s4 / F

s10 / C s10 / C s10 / C s10 / C s10 / C s10 / C s10 / C s10 / C

F

G

H

I

J

K

B10-M: 12-19

B10: vi-vii

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm)

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-G: 22

www.alliedmachine.com | 1.330.343.4283