TG-NOM_US-EN

ALLIED MACHINE & ENGINEERING | NOMENCLATURE

4TEX® Drill

PRODUCT NOMENCLATURE

4TEX Drill Holders D4 03

1200

M -

075

F

Drill Length

Series

Diameter*

Diameter Style

Shank Diameter

Shank Style

D2 = 2xD D3 = 3xD D4 = 4xD

03 04 05 06 07

09 11 14

0750 = 0.075" 1200 = 12 mm

I = Imperial M = Metric

Imperial

Metric

F M = Imperial flanged shank FM = Metric flanged shank

075 = 0.075" 100 = 1.000" 125 = 1.250" 150 = 1.500"

20 = 20 mm 25 = 25 mm 32 = 32 mm 40 = 40 mm

*Ordering nonstocked diameters: Nonstocked diameters are available upon request. Please refer to price list for applicable process fees.

Series Details Series

3 Series

4 Series

5 Series

6 Series

7 Series

9 Series

11 Series

14 Series

CuƩer Ø inch 0.472 - 0.531 0.532 - 0.610 0.611 - 0.728 0.728 - 0.866 0.867 - 1.043 1.044 - 1.259 1.260 - 1.535 1.536 - 1.850 mm 12.00 - 13.49 13.50 - 15.49 15.50 - 18.49 18.50 - 21.99 22.00 - 26.49 26.50 - 31.99 32.00 - 38.99 39.00 - 47.00

inch

0.750

0.750

1.000

1.000

1.000

1.250

1.500

1.500

mm 20.00

20.00

25.00

25.00

25.00

32.00

40.00

40.00

Shank Ø

4T-030203C-x 4T-030203P-x

Insert Prefix 4 # of Inserts

4T-040203-x

4T-05T203-x

4T-06T204-x

4T-070305-x

4T-09T306-x

4T-11T306-x

4T-140408-x

2

2

2

2

2

2

2

2

CUTTING EDGES

Periphery Edge

Center Edge

Center Edge

• Each insert has two inner cuƫng edges and two outer cuƫng edges. • Economical soluƟon that increases tool life because of the rotaƟon ability of the inserts. • Available in ISO material-specific geometry/coaƟng combinaƟons.

Periphery Edge

ISO Material

Part No. Suffix

Geometry

CoaƟng

DescripƟon

A general purpose geometry that provides excellent chip formaƟon in most steels including free-machining, medium- and high-carbon steels. A P30 carbide substrate for improved toughness and AM480 coaƟng, a proprietary wear-resistant mulƟlayer PVD coaƟng to improve tool life. A higher rake geometry that provides excellent chip formaƟon in both stainless steels and high-temperature alloys. A tough M25 carbide substrate coated with AM485, a high heat-resistance proprietary mulƟlayer PVD coaƟng. A lower rake geometry to improve edge strength in both hardened tool steels and high strength alloys. With a P30 carbide substrate for improved toughness and coated with AM480, a proprietary mulƟlayer PVD coaƟng to improve resistance against tool wear. With a general purpose geometry, the K inserts can be used in grey cast irons as well as ducƟle irons. A high wear-resistant K10 carbide substrate to improve tool life and coated with AM480, a proprietary mulƟlayer PVD coaƟng to improve resistance against tool wear. A higher rake cuƫng geometry provides excellent chip formaƟon in nonferrous materials. An M15/K15 carbide substrate paired with TiCN coaƟng for improved lubricity to resist built-up material, increasing tool life and maintaining chip formaƟon.

P

P

General Rake

AM480

S M

M

High Rake

AM485

H

H

Low Rake

AM480

K

K

General Rake

AM480

N

N

High Rake

TiCN

17

www.alliedmachine.com | 1.330.343.4283