TG-NOM_US-EN

ALLIED MACHINE & ENGINEERING | NOMENCLATURE

RevoluƟon Drill® & Opening Drill® PRODUCT NOMENCLATURE

RevoluƟon Drill Holders R

Opening Drill Holders OP1 - 1S -

34 X 22 - 150L

SS1.5

Drill Style Series

Drill Length 10 = 1.0xD 22 = 2.2xD 25 = 2.5xD 35 = 3.5xD 45 = 4.5xD

Shank Style

Series

Drill Length 1S = Short

Shank Style

R = Standard

34 48 36 52 38 54 42 56 44 58

150L = 1.500 Ø straight 200L = 2.000 Ø straight 40M = 40 mm ISO 9766 50M = 50 mm ISO 9766

OP1 OP2 OP3 OP4

SS1.5 = 1.500 Ø straight BT40 = BT40 SS2.0 = 2.000 Ø straight BT50 = BT50

1L = Long

SP = Stacked Plate

40M = 40 mm straight 50M = 50 mm straight HSK63 = HSK 63A/C HSK100 = HSK 100A/C

CV40 = CAT40 CV50 = CAT50 ABS63 = ABS63 DV50 = DIN50

CV40 = CAT40 CV50 = CAT50

46

RevoluƟon Drill & Opening Drill Inserts OP - 05 T3

08 - 1

H

HR

IC Type

Thickness

Radius

Carbide Grade Blank = C5 (P35)

Shank Style

Geometry

05 = 5/16"

T3 = 5/32"

08 = 1/32"

P = AM300® H = AM200®

A = TiAlN N = TiCN

Blank = General Purpose

1 = C1 (K35) 2 = C2 (K25)

HR = High Rake

T = TiN

U = Uncoated

SERIES DETAILS

RevoluƟon Drill

Diameter Range

Length-to-Diameter RaƟo

Shank OpƟons

Inserts per Cartridge

Series

Imperial (in) 1.875 - 2.000 2.000 - 2.200 2.200 - 2.400 2.400 - 2.600 2.600 - 2.800 2.800 - 3.000 3.000 - 3.200 3.200 - 3.400 3.400 - 3.600 3.600 - 3.800 3.800 - 4.000

Metric (mm) 47.63 - 50.80 50.80 - 55.88 55.88 - 60.96 60.96 - 66.04 66.04 - 71.12 71.12 - 76.20 76.20 - 81.28 81.28 - 86.36 86.36 - 91.44 91.44 - 96.52 96.52 - 101.60

1.0xD 2.2xD 2.5xD 3.5xD 4.5xD Straight CAT40 CAT50

34 36 38 42 44 46 48 52 54 56 58

2 2 2 2 3 3 3 3 3 4 4

Opening Drill

Diameter Range

Shank OpƟons

Straight (in)

Straight (mm) HSK63* HSK100 BT40* BT50 CAT40* CAT50 ABS63* DIN50

Inserts per Cartridge

Series

Imperial (in)

Metric (mm)

OP1 OP2 OP3 OP4

2.000 - 2.500 50.80 - 63.50 1.500 40 2.500 - 3.000 63.50 - 76.20 1.500 40 3.000 - 4.120 76.20 - 104.65 1.500 40 4.120 - 5.620 104.65 - 142.75 2.000 50

2 2 2 3

*Long length not available for OP4 series. Insert ApplicaƟon RecommendaƟons Carbide Grade OpƟons C5 (P35)

Straight Shanks Can be cut off for use in end mill holders. Cut and deburr at the score mark (circled) for improved rigidity when the body sits against the face of an end mill holder.

General purpose carbide grade suitable for most applicaƟons. Toughest carbide grade. Best combinaƟon of edge strength and tool life. Higher wear-resistant carbide suitable for abrasive material applicaƟons.

C1 (K35) C2 (K25)

AddiƟonal Geometry OpƟon High Rake Superior chip control and tool life in long chipping carbon and alloy steels (<200 BHN).

www.alliedmachine.com | 1.330.343.4283

18